Carbon brush complete with shunt and terminal.
(one only supplied)
The spring is not supplied with the brush. The factory supply this as a seperate part item
See part number 65806 below. (Item number 31 on diagram above)
The manufacturer recommends that carbon brushes are renewed as a pair and not individually. This may cause damage to the motor system
Carbon brushes should be checked periodically to access wear and avoid any armature damage.
Information on Carbon brush “life hours” can usually be found in the clipper manual.
This part can be used on the following models –
Andis AGC Single speed/Two speed/SUPER two speed
Part number: 27847
See parts diagram – item 17