Upper plate: GT503 – 17 teeth
Lower plate: GT504 – 18 teeth
Depth of cut: 3m
Width of cut: 74mm average
Extra Coarse 503/504 to fit the following: –
Aesculap Econom SE models
Aesculap Econom clippers – models GT367, GT474 models
Aesculap Econom Equipe GT674.
This blade clips to 3mm and is suitable for most beef cattle, and especially commercial cattle requiring to be clipped before housing. It is a good blade for coping with hair matted with manure or other types of dirt.
This blade should be considered for use also on horse’s especially thick coated cobs or the denser coated native breeds. Can be used effectively on the odd individual sheep, but is not recommended for any degree of shearing use on wool fibres on sheep or similar coated animals.
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve and maintain peak cutting performance.
This blade can be used to fit the following Aesculap/Heiniger/Liscop/Liveryman/Stewart Oster/Wolseley machines.
AESCULAP SE Models
HEINIGER “12 volt”
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP 1400-4-TD “SCARLET”
LISCOP EQUI-CLIP 1400-10 “CUTLI
LISCOP EQUI-CLIP AKKU-1600
LIVERYMAN “RED ROCKET”
STEWART OSTER “CLIPMASTER”