Blades Main Menu
Make: OSTER
Type: SIZE #40- very close/surgical
Description: Detachable blade
Number of teeth:  
Cutter:
(Upper plate)
41 teeth
Comb:
(Lower plate)
33 teeth
Depth of cut: 0.25mm/1/100th inch
Field of Use: Dog and small animal Clipping
Also used for veterinary purposes

DO NOT!

  • Touch the blades when moving!
  • Switch the machine on with loose or missing blades. (In the interests of safety ensure that both blades are tightly seated.)
  • Clip at an angle to the body as this may increase the potential to cut the skin. Try to keep the blade flat to the contour of the body. Stretch any loose skin.
  • Not attempt to alter the tension mechanism of the detachable blade set. This is set at the factory, any alteration can affect the performance of your clipper
  • Push the clipper blades through the hair in an attempt to force them to clip. Allow the blades to do the work.
  • Immerse either the machine or cutter head in liquid (oil/diesel/lubricant) of any kind.

BLADE OPERATIONAL USES:

All Oster "detachable blades" are made in the USA using high carbon steel to give an extended cutting life.

A popular blade for many veterinary practices, it is widely used for surgical and laboratory work.

In the field of cattle this blade will give a very close finish and is used often for trimming dairy cattle udders, or for preparing the show "top-lines" Can be also used for freeze branding preparation.

Used for heads of Charollias sheep for show trim to remove small areas of both hair and wool, also for cleaning legs for show purposes.

In a majority of cases for dog grooming when used by a competent groomer or experienced exhibitor this blade produces a high quality show finish (very close) on the face, feet or tails of a Poodle with excellent skin and coat qualities. For those who do their own Poodle tail docking the tail is clipped at a pre-determined length using the #40 blade to prepare the area for docking.

Very useful blade for preparing the underbelly of a pregnant bitch just before delivery, the blade is used to skim the area clean providing the skin underneath has no abrasions.

Useful blade when used on a number of mixed breeds. Dogs should be well groomed out before clipped.

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

Comb lengths shown should be added to the blade depth.

  • Comb No: 0 = 7/8th inches
  • Comb No: 1/2 =3/4th inch
  • Comb No: 1 = 5/8th inch.
  • Comb No: 1.5 = 1/2th inch
  • Comb No: 2 = 3/8th inch
  • Comb No: 3 = 3/8th inch
  • Comb No: 4 = 5/16th inch
  • Comb No: 5 - 32/16th inch
  • Comb No: A = 1 inch
  • Comb No: B = 1.25 inches
  • Comb No: C = 1.5 inches
  • Comb No: D = 1.75 inches
  • Comb No: E = 2 inches
  • Comb No: S = 1. 63inches

One should be mindful that when clipped this close some animals (horses especially) may "burn" if exposed to strong sunlight.

BLADE INFORMATION:

All whom clip should be aware that irrespective of either the type and make of machine used or the type of blades selected ALL blades can become blunt at a moment's notice. This is not normally connected with, nor a fault of, the clipping machine, but more likely one of several factors most common of which are (not in any order of priority!)

  1. In sufficient oiling by the operator
  2. Incorrect or bad sharpening
  3. Dirt and dust accumulated in the animals coat

ALWAYS HAVE A SPARE SET OF SHARPENED BLADES AVAILABLE BEFORE YOU START TO CLIP AN ANIMAL

Blade Storage:

When not in use, and having been thoroughly cleaned and oiled, the blades should be wrapped in a "grease" proof type paper and stored in a dry place preferably in your house. Any traces of rust will diminish the operational performance of the blades and may subsequently affect the clipping performance.

Do not leave in blades in tack rooms or stables. The same should apply to your clipper.

Additional Information:

These blades are available from Peasridge

01424 882900 or e-mail PEASRIDGE info@peasridge.co.uk to order your new blades.

Orders received before 3pm will normally be shipped the same day for next day delivery.


PEASRIDGE

Repair & service all makes of clippers and trimmers
and professionally sharpen all types of blades

Tel: 01424 882900 or E-mail info@peasridge.co.uk


Whilst every care has been take to ensure the accuracy of the information given both in the written text and pictures created, neither PEASRIDGE nor any of its staff can accept any responsibly of any type for injury or damage inflicted by or caused to persons or animals by any operator or a third party who has made reference to this web site. Owner/Operators of all such appliance should satisfy themselves as to the accuracy of any statements made, and if they are unsure on any point consult the manufacturer direct.

Blades

OSTER
SIZE #40- very close/surgical