| Make: |
HEINIGER |
| Type: |
31 - Standard |
| Description: |
Traditional style
two piece blade set
75mm cutting width. |
Number of teeth:
Cutter
(Upper plate) |
15 teeth |
Number of teeth:
Comb
(Lower plate) |
31 teeth |
| Depth of cut: |
2-4mm |
| Field of Use: |
Cattle and Horses |

DO NOT!
- Attempt to fit blades to the machine with it connected to the main
power supply.
- Touch the blades when moving!
- Switch the machine on with loose or missing blades. (In the interests
of safety ensure that both blades are tightly seated.)
- Over tighten the blades in an attempt to force them to clip.
- Immerse either the machine or cutter head in liquid
(oil/diesel/lubricant) of any kind.
BLADE OPERATIONAL USES:
The standard blade is a popular blade for use on both horses and cattle.
For horses it is an ideal "Hunter" clip blade being suitable for most coats
and able to cope with the average leg "feathers"
Good blade for clipping out show cattle and other general work, but for
winter housed store cattle or cleaning up for slaughter it is suggested
farmers use the Heiniger Ultra Coarse blade set
BLADE INFORMATION:
All whom clip should be aware that irrespective of either the type and
make of machine used or the type of blades selected ALL blades can become
blunt at a moment's notice. This is not normally connected with, nor a fault
of, the clipping machine, but more likely one of several factors most common
of which are (not in any order of priority!)
- In correct tensioning by the operator
- Incorrect or bad sharpening
- Dirt and dust accumulated in the animals coat
ALWAYS HAVE A SPARE SET OF SHARPENED BLADES AVAILABLE BEFORE YOU START TO
CLIP AN ANIMAL
Blade Storage:
When not in use and having been thoroughly cleaned and oiled, the blades
should be wrapped in a "grease" proof type paper and stored in a dry place
preferably in your house. Any traces of rust will diminish the operational
performance of the blades and may subsequently affect the clipping
performance.
Do not leave blades in tack rooms or stables. The same should apply to
your clipper.
Additional Information:
These blades are available from Peasridge
(01424 882900 or e-mail PEASRIDGE info@peasridge.co.uk to order your new
blades)
Orders received before 3pm will normally be shipped the same day for next
day delivery.
PEASRIDGE
Repair & service all makes of clippers and trimmers
and professionally sharpen all types of blades
Tel: 01424 882900 or E-mail info@peasridge.co.uk
Whilst every care has been take to ensure the accuracy of the information given both in the written text and pictures created, neither PEASRIDGE nor any of its staff can accept any responsibly of any type for injury or damage inflicted by or caused to persons or animals by any operator or a third party who has made reference to this web site. Owner/Operators of all such appliance should satisfy themselves as to the accuracy of any statements made, and if they are unsure on any point consult the manufacturer direct.
|