DO NOT!

• Attempt to fit blades to the machine with it connected to the main power supply.
• Touch the blades when moving!
• Switch the machine on with loose or missing blades. (In the interests of safety ensure that both blades are tightly seated.)
• Over tighten the blades in an attempt to force them to clip.
• Immerse either the machine or cutter head in liquid (oil/diesel/lubricant) of any kind.

BLADE OPERATIONAL USES:

A close blade, it is often used on poodle faces and feet, also used for feet and tails in certain show trims. Good for cleaning out under feet of any breed.

Attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

This blade is suitable for various industrial uses.

Comb lengths shown should be added to the blade depth

• Comb No: 1 = 2mm
• Comb No: 2 = 6mm
• Comb No: 3 = 9mm
• Comb No: 4 = 12mm

One should be mindful that when clipped this close some animals (horses especially) may "burn" if exposed to strong sunlight.

BLADE INFORMATION:

All whom clip should be aware that irrespective of either the type and make of machine used or the type of blades selected ALL blades can become blunt at a moment's notice. This is not normally connected with, nor a fault of, the clipping machine, but more likely one of several factors most common of which are (not in any order of priority!)

1. In correct tensioning by the operator
2. Incorrect or bad sharpening
3. Dirt and dust accumulated in the animals coat

ALWAYS HAVE A SPARE SET OF SHARPENED BLADES AVAILABLE BEFORE YOU START TO CLIP AN ANIMAL

Blade Storage:

When not in use, and having been thoroughly cleaned and oiled, the blades should be wrapped in a "grease" proof type paper and stored in a dry place preferably in your house. Any traces of rust will diminish the operational performance of the blades and may subsequently affect the clipping performance.

Do not leave in blades in tack rooms or stables. The same should apply to your clipper.

Additional Information:

These blades are available from Peasridge

(01424 882900 or e-mail PEASRIDGE info@peasridge.co.uk to order your new blades)

Orders received before 3pm will normally be shipped the same day for next day delivery.

PEASRIDGE

Repair & service all makes of clippers and trimmers
and professionally sharpen all types of blades

Tel: 01424 882900 or E-mail info@peasridge.co.uk

Whilst every care has been take to ensure the accuracy of the information given both in the written text and pictures created, neither PEASRIDGE nor any of its staff can accept any responsibly of any type for injury or damage inflicted by or caused to persons or animals by any operator or a third party who has made reference to this web site. Owner/Operators of all such appliance should satisfy themselves as to the accuracy of any statements made, and if they are unsure on any point consult the manufacturer direct.