Homepage
 
The Natural home for animal grooming! 
 
 
Online Catalogue
Site MapContact UsTerms & Conds 
 
Advanced 
 
View Basket
Checkout
   
HomeCatalogUpLogin


LISCOP 1300-2-TD clipper diagram

Liscop 1300-2-TD - ArmatureLiscop 1300-2-TD - Armature Ref: 60360

Liscop 1300-2-TD - Armature complete with fan

Part number: 60360

Item 102 on the above body diagram.

Price: 156.92 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Field coilLiscop 1300-2-TD - Field coil Ref: 66140

Liscop 1300-2-TD - Field coil assembly

Part number: 66140

Item 226 on the above body diagram.

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.



Price: 169.37 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - PCBLiscop 1300-2-TD - PCB Ref: 66120

Liscop 1300-2-TD - PCB complete assembly
This includes the following part numbers:
206 - condenser
210 - motor protection switch
218 - on/off switch
219 - 2 pole wire connector
236 - connection wire
237 - Amp plug
238 - round contact pin

Part number: 66120

Item 221 on the above body diagram.

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 94.12 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Double gear 29/13 toothLiscop 1300-2-TD - Double gear 29/13 tooth Ref: 60670

Liscop 1300-2-TD - Double gear 29/13 tooth

This double gear part number 60670 can also be fitted to the:-
Liscop 1100-1 TD
Liscop 3000
Liveryman "Arena C90"
Liveryman "Mustang".

Part number: 60670

See clipper head diagram above.Item 2.

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 42.55 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Gear and shaft assemblyLiscop 1300-2-TD - Gear and shaft assembly Ref: 60700

Liscop 1300-2-TD - Gear and shaft assembly 30 teeth

This gear and shaft assembly can also be fitted to the: -
Liscop 1 TD

Part number: 60700

See clipper head diagram above item 2

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 42.24 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Motor protection switch.Liscop 1300-2-TD - Motor protection switch. Ref: 66040

Liscop 1300-2-TD - Motor protection switch.

Part number 210 as show on the clipper lower body diagram above

This motor protection switch can be used on the following Liscop models -

Liscop 1500 cattle/horse clipper
Liscop 3000
Liveryman Arena
Liveryman Mustang
(Liveryman are Liscop machines - using the "Liveryman" brand -
Part numbers may vary on product pages



IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 31.37 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Body screwLiscop 1300-2-TD - Body screw Ref: 66160

Liscop 1300-2-TD - Body casing screw - 40 x 25
(Sold individually)

Part number: 66160

Item 228 on the above body diagram.

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.



RETAIL CUSTOMERS
FREE UK Mainland FIRST CLASS POSTAGE on ALL ORDERS under 10.00 gross value.



Price: 3.43 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]
People who bought this item also bought:

Liscop 1300-2-TD - Condenser

Liscop 1300-2-TD - Condenser
spacer

Liscop 3000 - Carbon brush with spring

Liscop 3000 - Carbon brush with spring
spacer

Liscop 1300-2-TD - On/Off switchLiscop 1300-2-TD - On/Off switch Ref: 66090
Liscop 1300-2-TD - Motor on/off switch.

Part number: 66090

Part number 218 as show on the clipper lower body diagram above

IMPORTANT - Please Note!
The original slide switch is no longer available and has been replaced by the factory with a new "rocker" type switch. The two terminals are vertical as opposed to the earlier model which had bent terminals. This is easy to fit but DIY owners should note - you need to be able to solder connections. Fitting instructions are provided with each new switch in German! (However a translation is given below.). Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.

GERMAN TO ENGLISH TRANSLATION:
ASSEMBLY INSTRUCTIONS
Replacement slide switch - rocker switch part number: 66090

The original slide switch is no longer available and has been replaced by the factory with a new rocker switch-conversion kit.

They should be fitted to the existing EL board as follows...

Step 1
Remove the old slide switch connections - see fig 1.
Step 2
Replace with the new slide switch - see fig 2.
Step 3
Solder the switch and the circuit board at the marked points - see fig 3

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 21.38 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - CondenserLiscop 1300-2-TD - Condenser Ref: 66010

Liscop 1300-2-TD - Condenser

0,1uF+2x2400pF x1Y2
BV 16.250/93
250v 50/60Hz25/100/21-C
EN 60384-14 (03)
01.11

Part number: 66010
(previously 19-0350206)

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.



Price: 20.99 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]
People who bought this item also bought:

Liscop 3000 - Carbon brush with spring

Liscop 3000 - Carbon brush with spring
spacer

Liveryman "Arena Plus" - Suppressor

Liveryman
spacer

International shipping rate

International shipping rate
spacer

Liscop 1300-2-TD - O-ring Liscop 1300-2-TD - O-ring Ref: 60560

Liscop 1300-2-TD - O-ring for bearing.
Can be used for either the front and rear bearing. (Same part number for both!)

Part number: 60560.

See diagram above - body section - item 24

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.



RETAIL CUSTOMERS
FREE UK Mainland FIRST CLASS POSTAGE on ALL ORDERS under 10.00 gross value.





Price: 1.32 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Spring discLiscop 1300-2-TD - Spring disc Ref: 60010

Liscop "Super Profi" 3000 - spring disc

Part number: 60010

See diagram above for parts identification. (Item 102 - head parts)

Price: 2.34 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Air filterLiscop 1300-2-TD - Air filter Ref: 66030

Liscop 1300-2-TD - Air filter

Part number: 66030

See clipper diagram above for parts location. Item 209


Price: 8.39 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Liscop 1300-2-TD - Tension nutLiscop 1300-2-TD - Tension nut Ref: 60750

Liscop 1300-2-TD - Tension nut

Part number 60750 as shown on head diagram above

This tension nut can be used on the following Liscop/Liveryman models -
Liscop 1 - TD
Liscop 2 - TD
Liscop 1300 -2-TD
Liscop 1500 Super head
Liscop 3000
Liveryman Arena C 90
Liveryman Arena Plus and Arena Plus version II head
Liveryman Mustang (Bronco)

(Liveryman are Liscop machines - using the "Liveryman" brand -

In the case of Liveryman models please check as part numbers may vary on individual models




RETAIL CUSTOMERS
FREE UK Mainland FIRST CLASS POSTAGE on ALL ORDERS under 10.00 gross value.





Price: 3.60 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]
People who bought this item also bought:

Liscop 3000 - Tension bolt

Liscop 3000 - Tension bolt
spacer

Liscop 3000 - Tension spring

Liscop 3000 - Tension spring
spacer

International shipping rate

International shipping rate
spacer

Liscop 1300-2-TD - Tension springLiscop 1300-2-TD - Tension spring Ref: 60740

Tension spring for Liscop 1300-2-TD clipper.

Part number 60740 as show on the clipper head diagram above

This tension spring can be used on the following Liscop/Liveryman models -
Liscop 1100 -1-TD
Liscop 1300 -2-TD
Liscop 1500 Super head
Liscop 3000
Liveryman Arena C 90
Liveryman Arena C130
Liveryman Arena Plus and Arena Plus version II head
Liveryman Mustang (Bronco)
Liveryman Sprinter

PLEASE NOTE
You will often find Liveryman clippers are Liscop machines which have been sold under the "Liveryman" brand. As such they may have different upper and lower body casing in order to display the "Liveryman name and logo" but many head and internal parts are often the same as the relevant Liscop machine.

In the case of Liveryman models please check as part numbers may vary on certain individual models.



RETAIL CUSTOMERS
FREE UK Mainland FIRST CLASS POSTAGE on ALL ORDERS under 10.00 gross value.




Price: 4.08 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]
People who bought this item also bought:

Liscop 3000 - Tension nut

Liscop 3000 - Tension nut
spacer

Liscop 3000 - Tension bolt

Liscop 3000 - Tension bolt
spacer

International shipping rate

International shipping rate
spacer

Liscop 1300-2-TD - Tension boltLiscop 1300-2-TD - Tension bolt Ref: 60730

Liscop 1300-2-TD - Tension bolt

Part number: 60730

See location on diagram - clipper head

This tension bolt can be used on the following Liscop/Liveryman models -
Liscop 1 - TD
Liscop 2 - TD
Liscop 1300 -2-TD
Liscop 1500 Super head
Liscop 3000
Liveryman Arena C90
Liveryman Arena Plus
Liveryman Elite
Liveryman Mustang (Bronco)



RETAIL CUSTOMERS
FREE UK Mainland FIRST CLASS POSTAGE on ALL ORDERS under 10.00 gross value.




Price: 2.68 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]
People who bought this item also bought:

Liscop 3000 - Tension nut

Liscop 3000 - Tension nut
spacer

Liscop 3000 - Tension spring

Liscop 3000 - Tension spring
spacer

International shipping rate

International shipping rate
spacer

Liscop 1300-2-TD - Carbon brush with spring	Liscop 1300-2-TD - Carbon brush with spring Ref: 60380

Liscop "1300-2-TD" - Carbon brush with spring

Carbon brush set (pair) with spring attached for the Liscop 1300-2-TD model.

Item 5 on the above diagram.


Carbon brushes should be checked periodically to access wear and avoid any motor damage.

Information on Carbon brush "life hours" can usually be found in the clipper manual.

Part number: 60380

PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.


IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 13.73 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]
People who bought this item also bought:

Liscop 1300-2-TD - Condenser

Liscop 1300-2-TD - Condenser
spacer

Liveryman "Arena Plus" - Suppressor

Liveryman
spacer

Liscop 3000 - Body screw - pair

Liscop 3000 - Body screw - pair
spacer

Liscop 1300-2-TD - CirclipLiscop 1300-2-TD - Circlip Ref: 60270

Liscop 1300-2-TD - Circlip
Circlip for head gear cog - can be used with 1300-1-TD models.

Part number: 60270

See head diagram above.



RETAIL CUSTOMERS
FREE UK Mainland FIRST CLASS POSTAGE on ALL ORDERS under 10.00 gross value.



Price: 1.80 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]