Advanced
Online Catalogue
>
CLIPPER PARTS
>
Wolseley clipper parts
IMPORTANT CUSTOMER INFORMATION:
There are two models of the Wolseley Swift still in use - the Mark 1 and the Mark 2.
Both are now out of production and only parts for the Wolseley Mark II clippers are available. Parts for the earlier Mark I model are no longer available.
We show diagrams of both the MkI and MkII clipper heads under our
CLIPPER ADVICE
section (please see box marked
CLIPPER ADVICE
on the Home page nav bar for identification purposes.
Customer can identify which model they have by counting the teeth of the gearwheel. The Wolseley Swift Mark II possesses 38 teeth.
PEASRIDGE 2008
Wolseley "Swift Mk II" - Gearwheel with shaft
Product code: 50028
Wolseley "Swift Mk II" 38-tooth gearwheel fitted to shaft assembly
Part number: 50028
See clipper diagram above for parts location.
The 40-tooth gear wheel for the Swift Mk1 model is no longer available.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £29.80
(Including: VAT at 17.5%)
Wolseley "Swift" - Tension bolt, spring and nut set
Product code: 40051-2-3
Wolseley blade tension bolt, spring and nut set
Part number: 40051-2-3
See clipper diagram above for parts location.
PLEASE NOTE:
This blade tension bolt, spring and nut set may also be used for the following Wolseley and Liscop models:
Wolseley "Swift"
Wolseley "Harrier"
Wolseley "Falcon"
Liscop " 3000"
PLEASE NOTE:
This blade tension bolt, spring and nut set is not suitable for the follow Liscop machines:
Liscop "1300-2-TD"
Liscop "Equi-Clip 1400-3-TD" (also known as the Liveryman "Stallion")
Liscop "Equi-Clip AKKU-A-1600 "(also known as the Liveryman "Whisper")
Price: £12.93
(Including: VAT at 17.5%)
Wolseley "Harrier" - Carbon brush set
Product code: 50542
Wolseley "Harrier" Carbon brush set comprising of two carbon brushes with springs attached.
Carbon brushes should to be replaced before they completely wear to avoid motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
Part number: 50542
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £10.83
(Including: VAT at 17.5%)
Wolseley "Harrier" Mk II" - Over load switch
Product code: 50583
Wolseley "Harrier" Mk II" over load (or cut out) switch assembly
Part number: 50583
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £36.73
(Including: VAT at 17.5%)
Online Catalogue
>
CLIPPER PARTS
>
Wolseley clipper parts
