IMPORTANT - CUSTOMERS INFORMATION This page is under constant construction with new parts being added. Please also note any manufacturers updates as listed
Always scroll FULLY down the page to see both updates and current parts listed
Some pages may only show a limited number of parts you will need to CLICK “View All” (See the top of the page above the diagram or at the bottom of each page)
If you require further advice please contact us.
Telephone: UK Mainland: 01424 882900/882211 Overseas: 0044 1424 882900/882211
PLEASE NOTE Telephone lines are open from (UK time: ) 1030 to 1230 hours and from 1430 until 1630 hours Monday to Friday. Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as ADAPTERS, BATTERIES & CHARGER UNITS are listed under CLIPPER ACCESSORIES See STORE SELECTIONS on the LHS of your screen
ORDERING PARTS Please have details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand. Failure to do this may result in errors in the parts ordered/supplied.
TRADE – DISCOUNTS Trade discounted prices are available on all parts to bona fide trade repair businesses. Please contact us for further information
SHIPPING We make every effort to ship parts the same day for next day delivery on the UK Mainland
INTERNATIONAL SHIPPING We ship worldwide daily.
MANUFACTURER'S UPDATES Early Wolseley clippers started with the Wolseley "Pedigree" Mark I model: around the mid 1960's and was succeeded a few years later with the Wolseley "Pedigree" Mark II model:
These machines where of a black bakelite composition and some had white or cream coloured heads.
In the early 1980's the Wolseley "Pedigree" Mark I & II model: were replaced with the Wolseley "Swift" Mark I model:
Please note: NO PARTS are available for either of the two Wolseley "Pedigree" models:
The Wolseley "Swift" Mark I model: started production as a 70w motor powered machine and like another similar Wolsely makes of the day was soon set to become one of the then UK's most successful and widely used machines - especially for horse clipping.
Our understanding is that the "Swift" Mark I model was in production up to Serial number 66170, there after the Mark II model was introduced. (Approximately 2004)
The "Swift" Mark I can be distinguished by the on/off switch on the top under the thumb and has two air filters - top and bottom of the body casing.
A reliable way to distinguish between both the "Swift" Mark I and Mark II models is to unscrew the clipper head from the clipper body. (Make sure the clipper is disconnected from the mains power supply!) Then count the gear wheel teeth (See the image on the left of your screen for location)
The "Swift" Mark I has a total of 40 teeth
The "Swift" Mark II a total of 38 teeth
Regrettably all "Swift" Mark I models are totally non-repairable
AVAILABILITY of PARTS:
Wolseley "Pedigree" Mark I & II model: All parts production for BOTH models has ceased ! NO PARTS are available.
Wolseley "Swift" Mark I All parts for these models have ceased production! This means they are no longer available - Very occasionally we may have a second hand model with useable parts - please contact us.. . Wolseley "Swift" Mark II
Generally distinguished from the Swift Mk III by the position of the on/off switch Wolseley "Swift" Mark II model - on/off switch on the upper body casing Wolseley "Swift" Mark III model - on/off switch on side of the lower body casing
Only certain parts for the Wolseley Mark II clippers are now available.
Wolseley "Swift" Mark II model - Carbon brush springs - part number: 50227 - DISCONTINUED