| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
 | WOLSELEY "Harrier Mk III" clippers CUSTOMER INFORMATION :
The WOLSELEY "Harrier MK III" clipper is the current model.
It has a black body casing with the head secured by two screws.
The Wolseley Harrier clipper was launched many years ago around the 1960/70's with the original machine known
as the "Princess" This machine was rated at 140 w.
Distinguishing features:
Black body and head normally held on with a "collar"
There then followed the Harrier Mark I version
Distinguishing features:
Black body and head normally held on with a "collar"
This in turn was replaced by the "green" Harrier and became known as the Harrier Mark II
with a certain similarity in the features relating to Liscop type machines of the period, especially the head.features
Distinguishing features:
Green body and head secured with two screws
Today (2011) the current model is the black bodied Harrier Mark III
Distinguishing features:
Black body and head secured with two screws
GEAR WHEEL :
When ordering a replacement clipper head gear wheel - check the number of teeth on your original gear wheel as some
machines were fitted with part number 50567 - a 29/13 toothed gear wheel, rather than the 29/11 toothed gear wheel -
part number 50845..
CLIPPER HEAD WASHER :
Some clipper heads do not have the washer part fitted (part number 50537)
Only replace if existing is worn..
|
|
|
 | Wolseley "Harrier Mk III" - Carbon brush with spring
Product code: 50542
Single carbon brush with spring attached for the Wolseley "Harrier Mk III" model.
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
Part number: 50542
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £6.86 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier Mk III" - Double toothed 29/11 gearwheel
Product code: 50845
Wolseley "Harrier Mk III" - Double toothed 29/11 gearwheel
(Also suitable for the Harrier Mk II newer model in green) .
When ordering this part to replace,- check your original gear wheel as some machines were fitted with part number 50567 -
a 29/13 toothed gear wheel.
IMPORTANT! Replace as per the existing number of teeth! DO NOT CHANGE teeth number
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Sage web images parts\parts-wolseley\Harrier\code-50845.jpg
Price: £44.88 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier Mk III" - Double toothed 29/13 gearwheel
Product code: 50567
Wolseley "Harrier Mk III" - Double toothed 29/13 gearwheel!
Part number: 50567
See diagram above - clipper head parts - for location.
When ordering this part to replace,- check your original gear wheel as some machines were fitted with part number 50567 -
a 29/13 toothed gear wheel.
IMPORTANT ! Replace as per the existing number of teeth! DO NOT CHANGE teeth number.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Sage web images parts\parts-wolseley\Harrier\code-50845.jpg
|
|
|
 | Wolseley "Harrier Mk III" - On/Off switch
Product code: 50554
Wolseley "Harrier Mk III" - On/Off switch
Part number: 50554
Suitable also to fit in the following models -
Wolseley "Harrier" Mk II
Wolseley "Swift" Mk II
Wolseley "Falcon"
MkII Harrier models can normally be distinguished by the X headed fixing screws holding the head to the body.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £22.18 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier Mk III" - Circuit Board
Product code: 50581
Wolseley "Harrier Mk III" - Circuit Board
Complete PCB with over load switch, capacitor/condencer, and on/off switch attached.
Capacitor/condencer reads:
0.1uF+ 2x 2400pF X1Y2
56016000690 A3
250v HMF25/100/21C
Part number: 50581
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £92.93 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier Mk III" - Condenser
Product code: 50584
Wolseley "Harrier Mk III" - Condenser
0.1uF+ 2x 2400pF X1Y2
56016000690 A3
250v HMF25/100/21C
Part number: 50584
PLEASE NOTE:
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £26.18 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier" - Condenser
Product code: 50543
Wolseley "Harrier" - Condenser
This condencer is for the older style Harrier models - those with a screw type collar.
BV16.200/11
0.1uF+ 2x 2400pF X1Y2
250v- 50/60 Hz 25/100/04C
EN 60384-14 (03) 11.08
Part number: 50543
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £28.82 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier Mk III" - Over load switch
Product code: 50583
Wolseley "Harrier" Mk III" over load (or cut out) switch assembly
Part number: 50583
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £38.63 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier MK III" - UK cable 240v
Product code: H07RNF
5m UK cord assembly complete with 3-pin UK plug
Part number: H07RNF
Not shown on diagram above.
IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice
Price: £22.18 (Including: VAT at 20%)
|
|
|
 | Wolseley "Harrier" - Tension nut, spring and bolt.
Product code: 40050
Wolseley blade tension bolt, spring and nut set
Part number: 40050
See clipper diagram above for parts location.
PLEASE NOTE:
This blade tension bolt, spring and nut set may also be used for the following Wolseley and Liscop models:
Wolseley "Swift"
Wolseley "Harrier"
Wolseley "Falcon"
Liscop " 3000"
This blade tension bolt, spring and nut set is NOT suitable for the follow Liscop machines:
Liscop "1300-2-TD"
Liscop "Equi-Clip 1400-3-TD" (also known as the Liveryman "Stallion")
Liscop "Equi-Clip AKKU-A-1600 "(also known as the Liveryman "Whisper")
Price: £11.88 (Including: VAT at 20%)
|
|
