Homepage
 
The Natural home for animal grooming! 
 
 
Online Catalogue
Site MapContact UsTerms & Conds 
 
Advanced 
 
View Basket
Checkout
   
HomeCatalogUpLogin


Wolseley
Wolseley
CUSTOMER INFORMATION :

The WOLSELEY "Falcon MK II" Clipper is the current modelIt can be distinguished from the earlier Falcon Mk I model
by several feature namely...

" The on/off switch - this is located on the left hand side as looking down on the clipper
" The "slide out" air filter positioned on the rear opposite side
" An alloy head, with stiff plastic collar behind the head
" The head is held on to the body with two screws

The original Wolseley Falcon clipper was known as the Falcon Mk I

Customers seeking to replace the head of the Falcon Mk I model should upgrade to the head of the Mk II model.
as only a limited number of internal parts are now available.

Wolseley Wolseley "Falcon" - UK cable 240v Ref: H07RNF

5m UK cord assembly complete with 3-pin UK plug

Part number: H07RNF

Not shown on diagram above.

IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.

PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice


Price: 25.08 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Wolseley Wolseley "Falcon" - On/Off switch Ref: 50554

Wolseley "Falcon" - On/Off switch

The original "on/off" switch GSS4 (1.4 (1.4) A. 250v 5E4) has now been discontinued and replaced with a new model by Wolseley

The replacement "on/off" switch is identical in slot size but instead of being a "slide" switch is a "rocker" type switch, with two vertical terminals as opposed to bent terminals.

This is easy to fit but DIY owners should note - you need to be able to solder connections.

Part number: 50554

Suitable also to fit in the following models -
Wolseley "Harrier" Mk II clipper
Wolseley "Swift" Mk II clippers
Wolseley "Shear Genius" shearing machine

NOTE: Mk II Harrier models can normally be distinguished by the X headed fixing screws holding the head to the body.

IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 22.18 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Wolseley Wolseley "Falcon" - Air filter Ref: 60420

Wolseley "Falcon" Mk I - Air filter

Part number: 60420

See clipper diagram above for parts location. Item 9


Price: 8.38 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Wolseley Wolseley "Falcon" - Head screws - pair Ref: 50853

Wolseley "Falcon" - Head screws - two supplied

Product code: 50853

See diagram above - head section



RETAIL CUSTOMERS
FREE UK Mainland FIRST CLASS POSTAGE on ALL ORDERS under 10.00 gross value.






IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.50228


Price: 7.39 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]

Wolseley Wolseley "Falcon" - Carbon brush with spring Ref: 60380

Wolseley "Falcon" - Carbon brush with spring pair

Carbon brush set (pair) with spring attached for the Wolseley "Falcon" model.

Item 15 on the above diagram.

This carbon brush may be fitted to the Liveryman "Mustang".

Carbon brushes should be checked periodically to access wear and avoid any motor damage.

Information on Carbon brush "life hours" can usually be found in the clipper manual.

Part number: 50542

PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.


IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.

In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.


Price: 13.73 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]
People who bought this item also bought:

Liveryman "Arena Plus" - Condenser

Liveryman
spacer

Liscop 1300-2-TD - Condenser

Liscop 1300-2-TD - Condenser
spacer

Wolseley Wolseley "Falcon" Mk II and III models - Tension nut, spring and bolt. Ref: 40050

Wolseley blade tension bolt, spring and nut set.

Part number: 40050

See clipper head diagram above for parts location.

PLEASE NOTE:
This blade tension bolt, spring and nut set may also be used for the following Wolseley and Liscop models:

Wolseley "Swift"
Wolseley "Harrier"
Wolseley "Falcon" Mark I, II and III models
Liscop " 3000"

IMPORTANT:
This blade tension bolt, spring and nut set is not suitable for the follow Liscop machines:
Liscop "1300-2-TD"
Liscop "Equi-Clip 1400-3-TD" (also known as the Liveryman "Stallion")
Liscop "Equi-Clip AKKU-A-1600 "(also known as the Liveryman "Whisper")








Price: 15.42 (Including VAT at 20%)




Currency conversion.
[View Currency Converter]