Homepage
 
The Natural home for animal grooming! 
 
 
Online Catalogue
Site MapContact UsTerms & Conds 
 
Advanced 
 
View Basket
Checkout
   
HomeCatalogUpLogin



WAHL " narrow "detachable" A 5 type blades are suitable for use on all professional clippers using "detachable" blades such as those manufactured by Andis, Laube, Oster, Moser, and Thrive.

An American made blade - not that that always means it is made these days in America, and one of the more recent introductions in to the blade world, the range is sadly limited to cutting depths of a mere 10mm, (blade size #4 and #4F) which is a strange situation in a world of far greater cutting depths.

Customer should note:
Narrow detachable small animal blades:

The blades clipping to the closest distance from the skin - thus leaving the least hair will be the highest blade number (#40)

Blades leaving increasing depths of hair start generally from blades size# 7 and downward in numerical numbering.

Blade sizes #40 to size #8.5 are of one style but varying cutting depths generally, and it is usual for them to have a smooth back on the lower plate.

From blade size 7 to the last blades in the range - which may be a 3 or ¾ size, the blades generally split into two distant types - the "full" tooth style blade or the "skip" tooth blade.

A "skip" tooth blade is a blade were the teeth of the lower plate (comb) alternate from one long with one short across the cutting face. This allows for a "scissoring effect when applied rather than a smooth finish. Often referred to as a "blending" blade.

A "full" tooth blade, is one marked "F" after the blade size number, or in some cases "FC" is a "full" or "full cut" blade indicating that it gives a smooth velvet style finish when used.

Thus blades marked as "#7" will invariably be a skip tooth blade, whereas a blade marked #7F or #7FC will be a full tooth blade.

Both "full" tooth blades and or "skip" tooth blades may be ribbed or have a plain surfaced on the lower blade plate. Some manufacturers claim the ribbed effect helps to keep the blade cooler.

A "corduroy" marked effect can sometimes be seen on a smooth coat such as a horse when a ribbed blade is used. Its effects are short termed however and usually disappear within 24/48hrs of being clipped.

The mm depth cutting size can, and may, often vary by a small amount from one manufacturer to another.

BLADES - WAHL C. S. - #50 - Extra close surgical - 0.4mm BLADES - WAHL C. S. - #50 - Extra close surgical - 0.4mm
Product Code: CB0120

Size: #50
Cuts to: 1/32" - 0.4mm
Cutting face width: 39mm
Extra close surgical blade

All Wahl "detachable blades" are ice tempered and made in Germany using high carbon steel to give a quality cutting edge.

This blade will give an extra close finish and is may in certain cases be used for show clipping. Used for surgical and laboratory work. Popular blade for Veterinary use.

In majority of cases for dog grooming use with a comb to give a good finish. Good on mixed breeds. Dogs should be well groomed out before clipped.

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade


IF YOU FEEL YOU NEED TO DISCUSS YOUR CLIPPING REQUIREMENTS OR WANT FURTHER ADVICE REGARDING CLIPPERS OR BLADES

please contact us - without obligation on Tel: 01424 882900

Telephone lines are open for product enquires from 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.

Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays

 



Price: 22.72 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #40 - Surgical - 0.6mm BLADES - WAHL C. S. - #40 - Surgical - 0.6mm
Product Code: CB0121

Size: #40
Cuts to: 3/128" - 0.6mm
Cutting face width: 39mm
Surgical blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Suitable blade for close show work on dogs, or for use with a comb attachment.

Ideal blade for surgical veterinary use

Popular blade for dairy cattle topline, and udder work

Useful blade for hogging manes of polo ponies.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 22.72 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #30 - Fine - 0.8mm BLADES - WAHL C. S. - #30 - Fine - 0.8mm
Product Code: CB0122

Size: #30
Cuts to: 1/32" - 0.8mm
Cutting face width: 42mm
Fine blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

This blade should prove a popular choice for Show clip work and can be used effectively with a number of comb attachments for variety of tasks.

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 22.72 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #15 - Medium/fine - 1.5mm BLADES - WAHL C. S. - #15 - Medium/fine - 1.5mm
Product Code: CB0123

Size: #15
Cuts to: 3/64" -1.5mm
Cutting face width: 42mm
Medium fine blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

A good blade for the face, feet, and tail of Poodles. Also good for under body work

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 22.72 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #10 - Medium - 1.8mm BLADES - WAHL C. S. - #10 - Medium - 1.8mm
Product Code: CB0124

Size: #10
Cuts to: 1/16" - 1.8mm
Cutting face width: 42mm
Medium blade

All Wahl "Competition Series" detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

This blade should prove a popular choice for Spaniel and Terrier heads, as well as for use under arms and legs.

Like its Oster counter part the Wahl size 10 blade is very useful for general and underbody use on a wide variety of dog breeds and is often selected when a reasonably close and or smooth finish is required. Most professional dog groomers will have this blade and probably use it the most within their day to day work.

A good blade use when going with the grain of the coat on the faces or light coloured Poodles, which are easily irritated. Used for the under belly work and also on the ears of terriers.

Often selected as the blade to use when stripping off coats which have mats that are to close to the skin to permit the use of other blades. Size 10 blades are universally used for bodywork on the Schnauzer breed.

This blade could be used on the following breeds for either body or other areas of work:-
· Affenpinscher
· Afghan
· Airedale
· Australian Terrier
· Bedlington Terrier
· Bichon Fries
· Border Terrier
· Bonvier des Flandres
· Briard
· Brittany Spaniel
· Brussels Griffon
· Cairn Terrier
· Chow Chow
· Clumber Spaniel
· Cocker Spaniel
· Dandie Dinmont Terrier
· English Cocker Spaniel
· English Setter
· English Toy & Field Spaniels
· Gordon & Irish Setters
· Irish Terrier
· Japanese Toy Spaniel
· Keeshond/Kerry Blue
· Terrier
· Lhasa Apso Maltese
· Norwich Terrier
· Old English Sheepdog
· Otterhound

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 22.72 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #9 - Medium - 2mm BLADES - WAHL C. S. - #9 - Medium - 2mm
Product Code: CB0125

Size: #9
Cuts to: 5/64" - 2mm
Cutting face width: 42mm
Medium blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Suitable blade for Terrier work or in cases requiring a very short body clip

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 24.98 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #8.5 - Medium - 3mm BLADES - WAHL C. S. - #8.5 - Medium - 3mm
Product Code: CB0126

Size: #8.5
Cuts to: 1/8" -3mm
Cutting face width: 42mm
Medium blade

All Wahl "Competition Series" detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Suitable blade for Terrier work or in cases requiring a very short body clip.

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 22.72 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #7 - Skip tooth - 3.8mm BLADES - WAHL C. S. - #7 - Skip tooth - 3.8mm
Product Code: CB0127

Size: #7
Cuts to: 5/32" - 3.8mm
Cutting face width: 42mm
Skip medium-coarse tooth blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Medium Course popular size blade for majority of body work tasks related to dog clipping

Due to the increased depth in the comb blade few if any attachment combs can be fitted to these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 29.06 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #7F - Full tooth - 3.8mm BLADES - WAHL C. S. - #7F - Full tooth - 3.8mm
Product Code: CB0128

Size: #7F
Cuts to: 5/32" - 3.8mm
Cutting face width: 42mm
Full medium-coarse tooth blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Medium Course popular size blade for majority of body work tasks related to dog clipping

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 29.06 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #5 - Skip tooth - 6mm BLADES - WAHL C. S. - #5 - Skip tooth - 6mm
Product Code: CB0129

Size: #5
Cuts to: 15/64" - 6mm
Cutting face width: 42mm
Skip coarse tooth blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Course popular size blade for a number of bodywork tasks related to dog clipping.

Not such a smooth velvety finish as compared to the 5F blade, more a blending scissored effect.

Due to the increased depth in the comb blade few if any attachment combs can be fitted to these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 34.87 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #5F - Full tooth - 6mm BLADES - WAHL C. S. - #5F - Full tooth - 6mm
Product Code: CB0130

Size: #5F
Cuts to: 15/64" - 6mm
Cutting face width: 42mm
Full coarse tooth blade
All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Course popular size blade for a number of bodywork tasks related to dog clipping.

Gives a smoother more velvety finish compared to the 5 skip tooth blade

Due to the increased depth in the comb blade few if any attachment combs can be fitted to these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade

 



Price: 34.87 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #4 - Skip tooth - 8mm BLADES - WAHL C. S. - #4 - Skip tooth - 8mm
Product Code: CB0131

Size: #4
Cuts to: 5/16" - 8mm
Cutting face width: 42mm
Skip extra coarse tooth blade

All Wahl "Competition Series" detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Extra Course, the #4 is a smaller version of a #3F leaving an 8mm finish. Popular blade for bodywork on a number of breeds and in keeping with other skip tooth blades it will produce a good "blending" result.

Due to the increased depth in the comb blade few if any attachment combs can be fitted to these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 34.87 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #4F - Full tooth - 8mm BLADES - WAHL C. S. - #4F - Full tooth - 8mm
Product Code: CB0132

Size: #4F
Cuts to: 5/16" - 8mm
Cutting face width: 42mm
Full extra coarse tooth blade

All Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Extra Course, the #4F is a smaller version of a #3F leaving an 8mm finish. Popular blade for bodywork and in keeping with other full tooth blades it produces an excellent finish.

Due to the increased depth in the comb blade few if any attachment combs can be fitted to these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 34.87 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #3F - Full tooth - 10mm BLADES - WAHL C. S. - #3F - Full tooth - 10mm
Product Code: CB0133

Size: #3F
Cuts to: 25/64" - 10mm
Cutting face width: 42mm
Full extra coarse tooth blade

Wahl "Competition Series” detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Ultra Course, the #3F is an enlarged version of a #4F but with greater depth and is the largest of all the full tooth blades within the range relieving the need for a comb attachment. For this reason it has become popular with many groomers as they become aware of the blade. In keeping with other full tooth blades it produce an excellent finish.

Due to the increased depth in the comb blade few if any attachment combs can be fitted to these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 38.04 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]


BLADES - WAHL C. S. - #10 - Wide -1.8mm BLADES - WAHL C. S. - #10 - Wide -1.8mm
Product Code: CB0134

Size: #10 WIDE
Cuts to: 1/16" - 1.8mm
Cutting face width: 60mm
Extra wide full tooth blade (2.5")

All Wahl "Competition Series" detachable blades are made in the USA and are supplied with a corrosion inhibitive finish to protect the steel. They are designed to fit most Oster and Andis detachable type blade clippers.

Marketed as essentially a blade for horse clipping, however cutting depth of 1.8mm it may be a touch close for many horses in winter.

Not quite in the same league as the Moser 2.3mm wide blades, or the CereBlade which may partly be due to the design of the comb teeth which are shorter than the Moser blades. Also Moser cutter teeth "lay" back further on the comb, which would contribute, to better hair penetration on some coats.

Not thought to be a blade suitable for cob breeds, and not recommended for the thicker native coats.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price: 40.67 (Including VAT at 20%)



Currency conversion.
[View Currency Converter]