| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Stewart Oster "Shearmaster" - Upper housing casing
Product code: 105694-015-000
Stewart Oster "Shearmaster" - Upper housing casing - black
Part number: 042894-000-000
See body diagram - item 4
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £45.07 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Lower housing casing
Product code: 105695-015-000
Stewart Oster "Shearmaster" - Lower housing casing
Part number: 105695-015-000
See body diagram - item 14
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £24.55 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Body screw
Product code: 044999-005-000
Stewart Oster "Shearmaster" - Body casing screw - one only
One of two screws used at the head end of the body casing
Part number: 044999-005-000
See body diagram - item 15
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.36 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Body screw
Product code: 042109-000-000
Stewart Oster "Shearmaster" - Body screw - one only
One of three screws used to secure the rear end of the body casing
Part number: 042109-000-000
See body diagram - item 15A
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.36 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Air filter
Product code: 045538-000-000
Stewart Oster "Shearmaster" - Air filter screen,
Please note: Screw not provided.
Part number: 045538-000-000
See body diagram above - items 1
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.50 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Air filter screw
Product code: 042109-010-000
Stewart Oster "Shearmaster" - Air filter screw
Part number: 042109-010-000
See body diagram - item 2
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.34 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - On/Off switch
Product code: 058513-010-000
Stewart Oster "Shearmaster" - On/Off rocker switch
Part number: 058513-010-000
See body diagram - item 19
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £5.90 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Washer seal
Product code: 045591-000-000
Stewart Oster "Shearmaster" - Washer seal
Part number: 045591-000-000
See body diagram - item 18
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.58 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - O-ring
Product code: 042891-000-000
Stewart Oster "Shearmaster" - O-ring.
Part number: 042891-000-000
See body diagram - item 5
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.46 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Gear assembly
Product code: 042883-000-000
Stewart Oster "Shearmaster" - Gear assembly
Part number: 042883-000-000.
See head diagram - item 4
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £16.80 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Needle bearing
Product code: 103722-000-000
Stewart Oster "Shearmaster" - Needle bearing
Part number: 103722-000-000
See head diagram - item 27
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £18.32 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Retainer bearing
Product code: 042892-000-000
Stewart Oster "Shearmaster" - Retainer bearing.
Part number: 042892-000-000
See body diagram - item 11
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.62 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Guard bearing
Product code: 045500-000-000
Stewart Oster "Shearmaster" - Guard bearing
Part number: 045500-000-000
See body diagram - item 21
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £2.64 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Screw
Product code: 042186-000-000
Stewart Oster "Shearmaster" - Screw - one only
One of two used with the retainer bearing above (see part item body 11)
Part number: 042186-000-000
See body diagram - item 12
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.48 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Armature assembly
Product code: 107100-001-000
Stewart Oster - Armature assembly.
Part number: 107100-001-000
See body diagram 6
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £61.94 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Field assembly
Product code: 058457-000-000
Stewart Oster "Shearmaster" - Field assembly
Part number: 058457-000-000
See body diagram - item 9
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £49.01 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Brush tube
Product code: 058379-000-000
Stewart Oster "Shearmaster" - Brush tube
Brass tube for brush and spring - one only
(wire from field assembly needs to be solder on)
Part number: 058379-000-000
See body diagram - item 10
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £1.68 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Carbon brush
Product code: 042435-000-000
Stewart Oster "Shearmaster" - Carbon brush -each
Brush only
It is recommended to replace both brushes at the same time.
Uneven brush wear can cause damage to the armature.
Part number: 042435-000-000
See body diagram - item 7
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £1.87 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Carbon brush spring
Product code: 042894-000-000
Stewart Oster "Shearmaster"-- Carbon brush spring-each
One spring only
It is recommended to replace both brush springs at the same time.
Uneven brush or spring wear can cause damage to the armature.
Part number: 042894-000-000
See body diagram - item 8
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.62 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Terminal block
Product code: 058071-000-000
Stewart Oster "Shearmaster" - Terminal block
Part number: 058071-000-000
See body diagram - item 38
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £2.50 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Terminal block screw
Product code: 042403-000-000
Stewart Oster "Shearmaster" - Terminal block screw
Part number: 042403-000-000
See body diagram - item 39
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.31 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Capacitor
Product code: 053826-051-000
Stewart Oster "Shearmaster" - Capacitor
Part number:053826-051-000
See body diagram - item 37
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £1.06 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Cord sleeve
Product code: 055761-000-000
Stewart Oster "Shearmaster" - Cord sleeve
Part number: 055761-000-000
See body diagram - item 22
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £2.35 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Cord clamp
Product code: 044990-000-000
Stewart Oster "Shearmaster" - Cord clamp
Part number: 044990-000-000
See body diagram - item 27
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £4.51 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Screw for cord clamp
Product code: 042109-015-000
Stewart Oster "Shearmaster" - Screw for cord clamp #8-32x5/8th inch
Part number: 042109-015-000
See body diagram - item 28
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.34 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Gear case cover assembly
Product code: 044911-005-000
Stewart Oster "Shearmaster" - Gear case cover assembly
Please note: Not supplied with screws.
Part number: 144911-005-000
See head diagram - item 6
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £3.98 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Ven crankshaft gear
Product code: 044910-000-000
Stewart Oster "Shearmaster" - Crankshaft ven gear
Part number: 044910-000-000
See head diagram -`5
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £19.45 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Crankshaft Mark I & II models
Product code: 72262
Stewart Oster "Shearmaster" - crankshaft Mark I & II models.
Part number: P72262
See head diagram - item 15 for location purposes only
PLEASE NOTE!
This crankshaft can also be fitted to the SO "Shearmaster" head - Model EW310C
There are two versions of the crankshaft - each similar in shape and design, but the early Mark I and II "Shearmaster" heads are fitted with the thicker diameter crankshaft - diameter approx 0.8cm - Part number 72262.
The Mark III model is fitted with the later and thinner crankshaft - Part number 103723
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £15.67 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Crankshaft - Mark III models
Product code: 103782-000-000
Stewart Oster "Shearmaster" - crankshaft - Mark III models.
Part number:103782-000-000
See head diagram - item 20
PLEASE NOTE!
There are two versions of the crankshaft - each similar in shape and design. Mark I and II "Shearmaster" heads are fitted with the thicker crankshaft - approx 0.8cm - Part number 72262.
The Mark III model is fitted with a thinner diameter crankshaft measuring approx 0.7cm - Part number 103723
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £14.76 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Crank roller
Product code: 055677-000-000
Stewart Oster "Shearmaster" - Crank roller
Part number: 055677-000-000
See head diagram - item 15
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £6.50 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Fork - left hand
Product code: 044927-000-000
Stewart Oster "Shearmaster" - Fork - left-handed side -
Part number: 044927-000-000
See head diagram - item 12
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £11.74 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Fork - right hand
Product code: 044926-000-000
Stewart Oster "Shearmaster" - Fork right hand side.
Part number: 044926-000-000
See head diagram - item 11
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £11.74 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Fork assembly
Product code: 044924-005-000
Stewart Oster "Shearmaster" - Fork assembly.
(Fork guide plate assembly.)
Part number: 044924-005-000
See head diagram - item 10
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £42.05 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Tension pin
Product code: 044916-000-000
Stewart Oster "Shearmaster" - Tension pin
Part number: 044916-000-000
See head diagram - item 8
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £2.66 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Cutter retainer spring
Product code: 045503-000-000
Stewart Oster "Shearmaster" - Cutter retainer spring
Part number: 045503-000-000
See head diagram - item 14.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £1.18 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Retaining spring
Product code: 055689-000-000
Stewart Oster "Shearmaster" - Retaining spring.
(Fork guide plate spring.)
This spring may require replacing from time to time depending on frequency of use and cases of over tensioning when in operation.
Part number: 055689-000-000
Part number 19 as show on the clipper head diagram above.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.86 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Screw
Product code: 042110-000-000
Stewart Oster "Shearmaster" - Gear case screw.
Part number: 042110-000-000
See head diagram - item 1
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.58 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Fork guide plate spring screw
Product code: 042106-000-000
Stewart Oster "Shearmaster" - Fork guide plate spring screw. This screw secures the spring to the fork guide plate as shown above.
Part number: 042106-000-000
See head diagram - item 23
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.31 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Fork guide plate spring screw - nut
Product code: 042445-000-000
Stewart Oster "Shearmaster" - Fork guide plate spring screw - nut
Nut for the screw that secures the spring to the fork guide plate
Part number: 042445-000-000
See above head diagram - items 19 and 23 shows location of nut.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.31 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Tension spring
Product code: 055681-000-000
Stewart Oster "Shearmaster" - Tension spring
Part number: 055681-000-000
See head diagram - item 17.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £0.86 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Screws SP
Product code: 042187-000-000
Stewart Oster "Shearmaster" - Screws SP
Comb blade screw to fix lower comb blade to shear head.
Part number: 042187-000-000
See head diagram - item 2.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £1.92 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - Tension cup nut
Product code: 055688-000-000
Stewart Oster "Shearmaster" - Tension cup nut
Part number: 055688-000-000
See head diagram - item 18
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
Price: £3.74 (Including: VAT at 20%)
|
|
|
 | Stewart Oster "Shearmaster" - UK cable 240v
Product code: H05RNF
5m UK cord assembly complete with 3-pin UK plug
Part number: H05RNF
See body diagram - item 20
(Not supplied with item 22)
IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice
Price: £22.18 (Including: VAT at 20%)
|
|
