| |
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail: shop@peasridge.co.uk or
Telephone: UK Mainland: 01424 882900/882211 Overseas: 0044 1424 882900
Telephone lines are open for product enquires from 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note: Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION: All electrical parts offered for sale on this web site are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
| Moser "Artiko" - Housing unit lower casing Product code: KM1245-7210 Moser "Artiko" - Housing unit lower casing This includes lower casings plus hanging bail arm.
Part number: KM1245-7210
See clipper diagram above for parts location - 0020
IMPORTANT - Please Note! Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £7.88 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Housing unit upper casing Product code: KM1245-7230 Moser "Artiko" - Housing unit upper casing This includes four casing screws and the air filter assembly
Part number: KM1245-7230
See clipper diagram above for parts location - 0010
IMPORTANT - Please Note! Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £9.41 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Driving lever Product code: KM1245-7140 Moser "Artiko"- Blade drive lever supplied with flange
Part number: KM1245-7140
See clipper diagram above for parts location. Item 0030
IMPORTANT - Please Note! Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £2.09 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Printed circuit board Product code: KM1245-7170 Moser "Artiko" - Printed circuit board assembly - supplied complete with switch assembly.
Part number: KM1245-7170
See clipper diagram above for parts location - Item 60
IMPORTANT - Please Note! Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION: All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Price: £19.34 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Switch assembly Product code: KM1245-7240 Moser "Artiko" - Switch assembly (switch only - not PCB unit)
Part number: KM1245-7240
See clipper diagram above for parts location.
IMPORTANT - Please Note! Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £3.28 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Holding plate assembly Product code: KM1245-7130 Moser "Artiko" - Holding plate blade hinge assembly - supplied with two fixing screws
It is important when replacing this part that the two hair spring sprigs (see red arrows) are correctly slotted in the two holes provided in the press button/blade release lever, to ensure correct working.
Part number: KM1245-7130
See clipper diagram above for parts location - Item 70
Price: £8.66 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Latch assembly Product code: KM1245-7120 Moser "Artiko" - Latch - blade release assembly
It is important when fitting the blade release lever that you ensure the two hair spring sprigs of the holding plate (blade hinge assembly) are correctly slotted into the two holes provided (see red arrows) before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.
Part number: KM1245-7120
See clipper diagram above for parts location. Item 80
Price: £2.89 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Rubber insert Product code: KM1245-7900 Moser "Artiko" - Rubber insert for clipper nose
Part number: KM1245-7900
Not shown in clipper diagram above.
Price: £0.65 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - Air filter Product code: KM1245-7905 Moser "Artiko" - Replacement air filter cover - at rear of upper clipper casing
Part number: KM1245-7905
Not shown in clipper diagram above.
Price: £3.53 (Including: VAT at 17.5%) |
|
|
| Moser "Artiko" - UK mains cable Product code: KM1245-7090 Moser "Artiko" - UK mains cable, complete with moulded 3 pin UK plug supplied with two screws and holding clamp,
IMPORTANT - Please Note! This plug attachment is not suitable for mainland European use Part number: KM1245-7090 See clipper diagram above for parts location - Item 90
IMPORTANT - Please Note! Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £5.73 (Including: VAT at 17.5%) |
|