| |
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale on this web site are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
 | Lister "Stablemate" - Tension bolt, spring and nut set
Product code: 258-34890
Lister "Stablemate" blade tension bolt, spring and nut set
Part number: 258-34890
See clipper diagram above for parts location.
PLEASE NOTE:
This blade tension bolt, spring and nut set may also be used for the following Lister models:
Lister "Laser"
Lister "Neon"
Lister "Star"
Lister "Showman"
Lister "Liberty"
Price: £9.67 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" - Carbon brush and spring set
Product code: 258-31200-210
Replacement single carbon brush and spring for the Lister "Stablemate" (will also fit the Lister "Laser" model.)
Lister part number: 258-31200 (brush) and 258-31210 (spring)
See clipper diagram above for parts location.
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
The following Lister models do not have carbon brush replacements as such as they are fitted with modern field motors and as such the motor unit has to be replaced.
Lister "Neon"
Lister "Star"
Lister "Showman"
Lister "Liberty"
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £3.62 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" - Zytel clipper head
Product code: 258-33360
Lister Zytel clipper head assembly
Part number: 258-33360
The Zytel head may be fitted to the following models:
Lister "Laser"
Lister "Stablemate"
Lister "Showman"
Lister "Liberty"
Early models of the Lister "Laser," Lister "Stablemate," and Lister "Showman".
may be fitted with a cream or off white Zytel head, as shown below.
The current Zytel head benefits from improved technology, has a better wearing ability and improved bearings. It is now black in colour and is interchangeable to all models as listed above. A metal version is not available.
A bare current Zytel head is available - but it is recommended to fit the complete head together with new shaft and gear wheel as supplied rather than attempt to use existing parts.
Heads for the Lister "Neon" and "Star" are different and the "Zytel" head should not be used.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £88.77 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" - Zytel head plain
Product code: 258-33350
Lister "Stablemate" - Zytel head plain
The head is supplied without internal parts
Part number: 258-33350
Early models of the Lister "Laser," Lister "Stablemate," and Lister "Showman".
may be fitted with this Zytel head unit.
It is recommended to check all existing internal parts including the shaft and gear wheel for signs of wear before fitting a plain Zytel head
See clipper head diagram above for component parts
Price: £41.60 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" - Blade comb lug with pin
Product code: 258-30850-850P
Blade comb peg with pin suitable for the following Lister models:
Premier
Laser
Stablemate
Showman
Liberty
Neon
Star
Lister part number: 258-30850 (comb peg) and 258-30850P (peg)
One peg and pin only supplied
See clipper diagram above for parts location.
Price: £1.81 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" - Crank head
Product code: 258-00061
Lister "Stablemate" - Crank head
Part number: 258-00061
See clipper head diagram above
Price: £25.03 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" - Crank head roller
Product code: 258-00057
Lister "Stablemate" - Crank head roller
Part number: 258-00061
See clipper head diagram above
Price: £14.95 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" Gear and Shaft assembly
Product code: 258-30820
Lister "Stablemate" Gear and Shaft assembly
Part number: 258-30820
See clipper head diagram above
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £35.96 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" - Air filter
Product code: 258-31300
Lister "Stablemate" Air filter assembly
Part number: 258-31300
See clipper body diagram above
Price: £5.17 (Including: VAT at 17.5%)
|
|
|
 | Lister "Stablemate" Air filter screw
Product code: 258-31310
Lister "Stablemate" Air filter screw (1)
Part number: 258-31310
See clipper body diagram above
Price: £0.36 (Including: VAT at 17.5%)
|
|
