| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Lister "Laser" - Gearbox assembly
Product code: 258-32070
Lister "Laser" - Gearbox assembly complete with oil seal fitted
Part number: 258-32070
See above body diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £37.51 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Intermediate Gear shaft
Product code: 258-32020
Lister "Laser" - Intermediate Gear shaft for 240v unit
Part number: 258-32020
See above body diagram - number 32
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £21.01 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Condenser
Product code: 258-33050
Lister "Laser" condenser unit
Part number: 258-33050
This condenser part is only suitable for the Lister "Laser" machine model
Item number 33 on the above body diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £23.39 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Overload switch
Product code: 258-32700
Lister "Laser" Overload switch 220-240v
Part number: 258-32700
See clipper head diagram above - item number 20
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £33.74 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Crank head
Product code: 258-00061
Lister "Laser" - Crank head
Part number: 258-00061
See clipper head diagram above
Price: £25.56 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Crank head roller
Product code: 258-00057
Lister "Laser" - Crank head roller
Part number: 258-00061
See clipper head diagram above
Price: £15.26 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Crank head with roller
Product code: 258-12850
Lister "Laser" - Crank head with roller
The crankhead and roller are assembled and supplied as one item..
(For some owners replacing themselves, this is easier than self fitting both items as no tools will be need.)
Part number: 258-12850
Shown as seperate items on the head diagram above - not as assembled item
Price: £42.92 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Carbon brush and spring set
Product code: 258-31200-210
Replacement single carbon brush and spring for the Lister "Laser" and "Stablemate" models.
Lister part number: 258-31200 (brush) and 258-31210 (spring)
See clipper diagram above for parts location - items 17 and 18
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
The following Lister models do not have carbon brush replacements as such as they are fitted with modern field motors and as such the motor unit has to be replaced.
Lister "Neon"
Lister "Star"
Lister "Showman"
Lister "Liberty"
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £3.70 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Carbon brush spring
Product code: 258-31210
Lister "Laser" - Carbon brush spring replacement
Single carbon brush spring to fit to carbon brush suitable for both the Lister "Laser" and "Stablemate" models.
Lister part number: 258-31210
See clipper diagram above for parts location - items 17 and 18
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
The following Lister models do not have carbon brush replacements as such as they are fitted with modern field motors and as such the motor unit has to be replaced.
Lister "Neon"
Lister "Star"
Lister "Showman"
Lister "Liberty"
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.88 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Carbon brush cap
Product code: 258-31220
Lister "Laser" - Carbon brush cap - each.
Replacement single carbon brush screw cap for the Lister "Laser"
Part number: 258-31220
See clipper diagram above for parts location - items 19
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £4.64 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Air filter
Product code: 258-31300
Lister "Laser" - Air filter assembly
Part number: 258-31300
See clipper body diagram above
Price: £5.28 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Air filter screw
Product code: 258-31310
Lister "Laser" - Air filter screw (1)
Part number: 258-31310
See clipper body diagram above
Price: £0.37 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - On/off switch
Product code: 258-32690
Lister "Laser" - On/off switch.
Part number: 258-32690
See clipper diagram above for parts location - item 7
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £17.42 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - On/off switch button
Product code: 258-31170
Lister "Laser" on/off switch button
(screw part number 258-31180 sold separately)
Part number: 258-31170
Item 14 on the diagram above
Price: £2.90 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - On/off switch screw
Product code: 258-31180
Lister "Laser" on/off switch screw 3 x 4
(switch part number 258-31170 sold separately)
Part number: 258-30130
Item 15 on the diagram above
Price: £0.36 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Zytel clipper head bare
Product code: 258-33351
Lister "Laser" - Zytel clipper head bare
Bare head consists of one Zytel head, fitted with ball bearings and blade lugs with pins inserted
Part number: 258-33351
Please see diagram above item 23 - clipper head
Price: £45.04 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Zytel clipper head
Product code: 258-33360
Lister Zytel clipper head assembly
Part number: 258-33360
See clipper head diagram above
The Zytel head may be fitted to the following models:
Lister "Laser"
Lister "Stablemate"
Lister "Showman"
Lister "Liberty"
Early models of the Lister "Laser," Lister "Stablemate," and Lister "Showman".
may be fitted with a cream or off white Zytel head, as shown below.
The current Zytel head benefits from improved technology, has a better wearing ability and improved bearings. It is now black in colour and is interchangeable to all models as listed above. A metal version is not available.
A bare current Zytel head is available - but it is recommended to fit the complete head together with new shaft and gear wheel as supplied rather than attempt to use existing parts.
Heads for the Lister "Neon" and "Star" are different and the "Zytel" head should not be used.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £90.66 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Adapter plate assembly
Product code: 258-32100
Lister "Laser" adapter plate assembly
Part number: 258-32100
See clipper diagram above for parts location - item 30
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £15.35 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Adapter plate screws
Product code: 258-32140
Lister "Laser" Adapter plate screw M4 x12 - one only
Used to secure the adapter plate above
Part number: 258-32140
Part number 31 on the above diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.36 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Gearbox seal
Product code: 258-32090
Lister "Laser" gearbox seal
Part number: 258-32090
See clipper head diagram above
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £2.72 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Plain bush for gearbox
Product code: 258-32080
Lister "Laser" - Plain bush for gearbox
Part number: 258-32080
See clipper diagram above.
(The plain bush is located in the gearbox.)
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
See clipper head diagram above
Price: £1.50 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Blade comb lug with pin
Product code: 258-30850-850P
Blade comb peg with pin suitable for the following Lister models:
Laser
Stablemate
Showman
Liberty
Neon
Star
Lister part number: 258-30850 (comb peg) and 258-30850P (peg)
One peg and pin only supplied
See clipper head diagram above for parts location.
Price: £1.85 (Including: VAT at 20%)
|
|
|
 | Lister "Laser" - Tension bolt, spring and nut set
Product code: 258-34890
Lister "Laser" blade tension bolt, spring and nut set
(New style)
Part number: 258-34890
See clipper head diagram above for parts location.
PLEASE NOTE:
This blade tension bolt, spring and nut set may also be used for the following Lister models:
Lister "Stablemate"
Lister "Neon"
Lister "Star"
Lister "Showman"
Lister "Liberty"
Price: £9.88 (Including: VAT at 20%)
|
|
