Advanced
Online Catalogue
>
CLIPPER PARTS
>
Liscop clipper parts
>
Liscop 1600 clipper parts
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from
1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale on this web site are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Liscop 1600 AKKU A-1600 - Oscillating spring - left hand side.
Product code: 61170
Liscop 1600 Equip-clip AKKU A-1600 - Oscillating spring - left hand side.
To select correct side view the machine with the upper casing exposed - from the rear of the head - do not turn the machine over - this will reverse the position of the oscillating springs.
Part number 718 as show on the clipper head diagram above.
This oscillating spring can be used on the following Liscop models -
Liscop Equi-clip 1400-3-TD
Please note: Oscillating spring are sold for right and left hand sides of the clipper head. It is recommended to consider changing both when carrying out a repair.
Price: £9.56
(Including: VAT at 17.5%)
Liscop 1600 AKKU A-1600 - Oscillating spring - right hand side.
Product code: 61160
Liscop 1600 Equip-clip AKKU A-1600 - Oscillating spring - right hand side.
To select correct side view the machine with the upper casing exposed - from the rear of the head - do not turn the machine over - this will reverse the position of the oscillating springs.
Part number 717 as show on the clipper head diagram above.
This oscillating spring can be used on the following Liscop models -
Liscop Equi-clip 1400-3-TD
Please note: Oscillating spring are sold for right and left hand sides of the clipper head. It is recommended to consider changing both when carrying out a repair.
Price: £9.56
(Including: VAT at 17.5%)
Liscop 1600 Equip-clip - Sliding bolt support.
Product code: 61050
Liscop 1600 Equip-clip - Sliding bolt support.
Part number 705 as show on the clipper head diagram above.
This part can be used on the following Liscop models -
Liscop Equi-clip 1400-3-TD
Price: £16.93
(Including: VAT at 17.5%)
Online Catalogue
>
CLIPPER PARTS
>
Liscop clipper parts
>
Liscop 1600 clipper parts
