| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
Liscop 1300-1-TD Shearing machine parts
The Liscop shearing machine, model TYPE 1300-1-TD, 220v-180w, is a long since discontinued machine.
Fortunately many of the parts of the Liscop 1300-2-TD, as shown in the parts diagram for that model are the same and can be used for repair purposes
Some parts are listed for online purchase - other parts have not as yet been put on-line as the site is under constant construction.
Any parts not currently shown for sale - please contact us and we will supply the current prices.
Two points should be noted:
The condenser has been changed from the original used.
The new condense is coloured yellow - part number 60390
The "protection" (or cut out switch as it is often known) is no longer available.
|
|
|
 | Liscop 1300-2-TD - Shearing head lower housing
Product code: 60180
Liscop 1300-2-TD Lower housing unit to shearing head.
Supplied with spindle (68370) and two comb blade screws (60190)
Part number: 60180
See diagram above. 122
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £109.03 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - double gear wheel
Product code: 60260
Liscop 1300-2-TD shearing machine - double gear wheel - 29/11 teeth
Part number: 60260
See diagram above for parts identification. (Item 4)
Price: £45.56 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - excentric shaft
Product code: 60170
Liscop 1300-2-TD shearing machine - eccentric shaft with thread.
Part number: 60170
See diagram above for parts identification. (Item121 - head parts)
Price: £26.75 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - Excentric roller
Product code: 60160
Liscop 1300-2-TD - Excentric roller
Part number: 60160
See diagram above. 20
Price: £8.98 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - gear wheel
Product code: 60280
Liscop 1300-2-TD shearing machine - gear wheel - 32 teeth
Part number: 60280
See diagram above for parts identification. (Item 106)
Price: £42.11 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - pressure arm
Product code: 60120
Liscop 1300-2-TD shearing machine - Pressure arm
Part number: 60120
See diagram above for parts identification. (Item 16 - head parts)
Price: £95.99 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - Pressure piece - right hand side
Product code: 60080
Liscop 1300-2-TD - Pressure piece - right hand side.
Part number: 60080
See diagram above - head parts - item 110
Price: £25.48 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - Pressure piece - left hand side
Product code: 60090
Liscop 1300-2-TD - Pressure piece - right hand side.
Part number: 60090
See diagram above - head parts - item 111
Price: £25.48 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - spring bow
Product code: 60100
Liscop 1300-2-TD shearing machine - spring bow.
(Often refer to as the "cutter retainer")
Part number: 60100
See diagram above for parts identification. (Item 14 - head parts)
Price: £6.73 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - holding spring
Product code: 60060
Liscop 1300-2-TD shearing machine - holding spring
Part number: 60060
See diagram above for parts identification. (Item 8 - head parts)
Price: £3.30 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - bolt with ball head
Product code: 60130
Liscop 1300-2-TD shearing machine - bolt with ball head
Part number: 60130
See diagram above for parts identification. (Item 14 - head parts)
Price: £3.70 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - hexagonal nut M3
Product code: 60110
Liscop 1300-2-TD shearing machine - hexagonal nut M3
Part number: 60110
See diagram above for parts identification. (Item 15 - head parts)
Price: £0.53 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - Cylindrical screw
Product code: 60070
Liscop 1300-2-TD - Cylindrical screw
Part number: 60070
See diagram above for parts identification. (Item 9 - head parts)
Price: £1.19 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - hexagonal nut BM4
Product code: 60150
Liscop 1300-2-TD shearing machine - hexagonal nut BM4
Part number: 60150
See diagram above for parts identification. (Item 19 - head parts)
Price: £1.58 (Including: VAT at 20%)
|
|
|
 | Liscop 1300-2-TD - disc spring
Product code: 60140
Liscop 1300-2-TD shearing machine - disc spring
Part number: 60140
See diagram above for parts identification. (Item 18 - head parts)
Price: £1.32 (Including: VAT at 20%)
|
|
|
 | Liscop 1300 - 2 - TD - Comb blade screw.
Product code: 60190
Liscop 1300 - 2 - TD - Comb blade screws.
Specially hardened broad headed screw used for securing the comb blade to the shearing machine shear head.
Single screw only
Part number: 60190
See diagram above - head parts - item 23
Price: £5.28 (Including: VAT at 20%)
|
|
