Advanced
Online Catalogue
>
CLIPPER PARTS
>
Heiniger clipper parts
>
Heiniger "Xtra" heavy-duty clipper parts
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from
1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale on this web site are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Heiniger "Xtra" clipper - Crank spindle
Product code: 706-506
Heiniger "Xtra" mains powered clipper - Crank spindle
Part number: 584-563
See clipper diagram above for parts location - item 4
Price: £13.08
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Crank spindle sleeve
Product code: 706-505
Heiniger "Xtra" mains powered clipper - Crank spindle sleeve
Part number: 584-551
See clipper diagram above for parts location - item 3
Price: £12.93
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Circlip
Product code: 706-524
Heiniger "Xtra" mains powered clipper - Circlip for cog
Part number: 584-678
See clipper diagram above for parts location - item 16
Price: £0.34
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Carbon brush with spring
Product code: 701-633
Replacement single carbon brush and spring together with cap for the Heiniger "Xtra" model.
PLEASE NOTE!
This item does not include the inner screw cap (Item number 26) as shown on the body diagram which is a seperate order item.
Part number: 701-633
As shown on the clipper body diagram above - item number 25
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
The following Heiniger models use the same carbon brush and spring replacements.
Heiniger "Heavy duty cattle clipper"
Heiniger "Xtra" Sheep shearing machine
This carbon brush and spring is NOT suitable for the Heiniger Delta model.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £15.56
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Brush cap
Product code: 701-634
Heiniger "Xtra" clipper - Brush cap only - one
Screws into the carbon brush and spring sleeve on the side of the clipper handpiece to retain the spring and brush.
NOTE: Not supplied with carbon or springs
Part number: 701-634
See clipper diagram above for parts location - item 25
This part item can also be used on the Heiniger "Xtra" heavy duty cattle clipper
Price: £1.57
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Drive block
Product code: 706-507
Heiniger "Xtra" mains powered clipper - crank drive block
Part number: 584-575
See clipper diagram above for parts location - item 5
Price: £5.41
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Driving carrier
Product code: 706-503
Heiniger "Xtra" clipper - Cutter driving carrier
The cutter driving carrier is the mechanism which drives the cutter blade when the drive block is engaged. When not fitted with blades place a rubber band around the head to hold the carrier over the drive block - thus avoiding the loss of the drive block.
When replacing check laminated spring riveted sets on both sides for wear/damage.
This part will also fit the following Heiniger models:
Heiniger heavy duty cattle clipper
Heiniger 12v cattle clipper
Part number: 706-503
See clipper head diagram above for parts location - item 5
Price: £46.53
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Laminated spring
Product code: 706-518
Heiniger "Xtra" clipper - Laminated spring riveted - one
Laminated springs form part of the mechanism of the driving carrier.
Each laminated spring riveted set contains three springs riveted together.
When one side is damaged it is good practice to change both sides.
This part will also fit the following Heiniger models:
Heiniger heavy duty cattle clipper
Heiniger 12v cattle clipper
Heiniger Delta clipper
Heiniger Progress clipper
Part number: 584630
See clipper head diagram above for parts location - item 8
Price: £14.91
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Centering ring
Product code: 706-514
Heiniger "Xtra clipper - Centering ring
Part number: 706-514
See clipper head diagram above for parts location - item 10
Price: £2.33
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - PH Screw M3 x 6
Product code: 706-525
Heiniger "Xtra" clipper - PH Screw M3 x 6 - (one only)
This screw is used to secure the laminated spring.to the drive carrier.
Part number: 706-525
See clipper head diagram above for parts location - item 6
Price: £1.94
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - PH Screw M5 x 16
Product code: 706-520
Heiniger "Xtra" clipper - PH Screw M5 x 16
Part number: 706-520
See clipper head diagram above for parts location - item 9
Price: £0.39
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - PH screw M16x16
Product code: 706-521
Heiniger "Xtra" mains powered clipper - Blade fixing screw (1 only)
Screws used to hold bottom plate blade in place on the clipper head.
See clipper diagram above for parts location - item 14
Price: £5.28
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Tension screw
Product code: 706-509
Heiniger "Xtra" clipper - Tension screw
The tension screw is supplied without the distance screw - which is a separate part number 706-510 - see clipper head diagram above.
Part number: 706-509
See clipper head diagram above for parts location - item 2
Price: £9.48
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Distance screw
Product code: 706-510
Heiniger "Xtra" clipper - Distance screw
The distance screw is supplied without the tension screw - which is a separate part number 706-509 - see clipper head diagram above.
Part number: 706-510
See clipper head diagram above for parts location - item 1
Price: £2.89
(Including: VAT at 17.5%)
Heiniger "Xtra" clipper - Spiral spring
Product code: 706-517
Heiniger "Xtra" clipper - Spiral spring
Part number: 706-517
See clipper head diagram above for parts location - item 3
Price: £1.99
(Including: VAT at 17.5%)
Online Catalogue
>
CLIPPER PARTS
>
Heiniger clipper parts
>
Heiniger "Xtra" heavy-duty clipper parts
