Advanced
Online Catalogue
>
SHEARING MACHINE PARTS
>
Heiniger Shearing machines parts
>
Heiniger "Xtra" Shearing machines parts
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from
1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
ORDERING SPARE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Parts are obtainable for 110v machines, but customers need to state at the time of ordering if their machine is 110v rated
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are non returnable!
Heiniger Xtra shearing machine - cogwheel
Product code: 717-711
Heiniger Xtra shearing machine - cogwheel black
12v gear 30 tooth
Part number: 717-711
See diagram above (head section) for part location - item "9"
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £22.54
(Including: VAT at 17.5%)
Heiniger "Xtra" shearing machine - Crank spindle
Product code: 706-506
Heiniger "Xtra" shearing machine - Crank spindle
Part number: 717-715
See head diagram above for parts location - item "Crank spindle"
Price: £13.08
(Including: VAT at 17.5%)
Heiniger "Xtra" shearing machine - Carbon brush with spring
Product code: 701-633
Replacement single carbon brush and spring for the Heiniger "Xtra" model.
PLEASE NOTE!
This item does not include the inner screw cap (Item number 26) as shown on the body diagram which is a separate order item.
Part number: 701-633
As shown on the body diagram above - item number 25
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
The following Heiniger models use the same carbon brush and spring replacements.
Heiniger "Heavy duty cattle clipper"
Heiniger "Xtra" Sheep shearing machine
This carbon brush and spring is NOT suitable for the Heiniger Delta model.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £15.56
(Including: VAT at 17.5%)
Heiniger "Xtra" shearing machine - Brush cap
Product code: 701-634
Heiniger "Xtra" shearing machine - Brush cap - one
Screws into the carbon brush and spring sleeve on the side of the clipper handpiece to retain the spring and brush.
NOTE: Not supplied with carbon or springs.
Part number: 701-634
See clipper diagram above for parts location - item 25
This part item can also be used on the Heiniger "Xtra" heavy duty cattle clipper
Price: £1.57
(Including: VAT at 17.5%)
Online Catalogue
>
SHEARING MACHINE PARTS
>
Heiniger Shearing machines parts
>
Heiniger "Xtra" Shearing machines parts
