| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
PLEASE SCROLL ALL THE WAY DOWN THIS PAGE TO ENSURE YOU SEE ALL PARTS LISTED TO DATE!
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Heiniger "Saphir" - Motor housing assembly
Product code: 707-813
Heiniger "Saphir" - Motor housing complete assembly.
This includes both the upper and lower body casing, bare but with the on/off switch mechanism included in the upper casing unit.
Please note: The six body fixing screws are not included.
Part number:707-813
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £23.94 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Motor assembly
Product code: 707-800-21
Heiniger "Saphir" - Motor complete assembly
Part number:707-800-21
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £38.46 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - PCB
Product code: 707-833
Heiniger "Saphir" - PCB
Part number:707-833
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £43.58 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Excentric cog wheel
Product code: 707-800-20
Heiniger "Saphir" - Excentric cog wheel complete with ball bearing.
Please note:
The cog wheel is not supplied with items 9 (circlip) and 10 (washer) - see drawing above
Product code: 707-800-20
See item number 11 on the above drawing.
Price: £39.89 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Felt seal
Product code: 707-848
Heiniger "Saphir" - Felt seal for drive lever (7) on diagram.
Part number: 707-848
See diagram above for part location.
Price: £1.43 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Blade interlock
Product code: 707-800-22
Heiniger "Saphir" - Blade interlock
(Latch - blade release assembly)
It is important when fitting the blade release lever that you ensure the two hair spring sprigs of the Blade support (blade hinge assembly) are correctly slotted into the two holes provided (see red arrows) before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.
As the "hook" which holds the blade in place is brittle by intent - it pays to fully push the blade release lever inward when removing the blade - do not snatch the blade off as this may contribute to breakage of the hook.
Part number: 707-800-22
See clipper diagram above for parts location. Item 0016
The "blue arrow" represents the "hook" clasp which hold the blade in place.
Failure to depress the red lever "fully" when releasing the blade - especially if you "snatch" the blade as many operators do without realising, will eventually lead to this hook snapping off with the result that the clipper is in-operational.
The correct procedure when removing your blade ......SWITCH OFF the clipper - then FULLY depress the red lever - whilst holding it FULLY depressed - remove the blade - after which the lever can be released.
When replacing the blade - do so with the motor running!
Price: £6.95 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Blade support
Product code: 707-854
Heiniger "Saphir" - Blade support - Holding plate blade hinge assembly - (Please note: not supplied with the fixing screws)
It is important when replacing this part that the two hair spring sprigs (see red arrows) are correctly slotted in the two holes provided in the press button/blade release lever, to ensure correct working.
Part number: 707-854
See clipper diagram above for parts location. Item 0015
Price: £20.70 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Rubber tap
Product code: 707-855
Heiniger "Saphir" - rubber tap
Part number: 707-855
See clipper diagram above for parts location. Item 06
Price: £2.00 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Turning lever
Product code: 707-847
Heiniger "Saphir" - Turning lever
(often referred to as a "drive lever assembly"
Part number: 707-847
See clipper diagram above for parts location. Item 07
Price: £2.86 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - circlip
Product code: 707-856
Heiniger "Saphir" - drive head circlip
Part number: 707-856
See clipper diagram above for parts location. Item 09
Price: £0.29 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Washer
Product code: 707-886
Heiniger "Saphir" - washer
Part number: 707-886
See clipper diagram above for parts location. Item 10
Price: £0.58 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Body casing screw
Product code: 707-557
Heiniger "Saphir" - Body casing screw - one only.
(normally six screws are used to fix the upper and lower body casings.)
Item number 14 on the above diagram.
Part number: 707-895
Price: £0.29 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Power adapter plug - UK three pin
Product code: 707-897
Heiniger "Saphir" - Power adapter plug - UK three pin
Item number 30 on the above diagram.
This plug clips into the power adapter (Item 25 in the above diagram)
(One can fit a range of electrical plugs to this power adapter for EU, USA and AUS use.)
Part number: 707-897
Price: £3.14 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Power adapter plug - Euro 2 pin
Product code: 707-895
Heiniger "Saphir" - Power adapter plug - Euro 2 pin
Item number 28 on the above diagram.
This plug clips into the power adapter (Item 25 in the above diagram)
(One can fit a range of electrical plugs to this power adapter for UK, EU, USA and AUS use.)
Part number: 707-895
Price: £3.14 (Including: VAT at 20%)
|
|
|
 | Heiniger "Saphir" - Battery unit
Product code: 707-835
Spare Li-Ionic battery 7.4v / 1.4Ah unit
Part number 707-835
This battery fits the Heiniger "Saphir" Cordless detachable blade clipper.
Price: £53.80 (Including: VAT at 20%)
|
|
