| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Heiniger "Handy" clipper - Driving carrier
Product code: 706-503
Heiniger "Handy" clipper - Cutter driving carrier
The cutter driving carrier is the mechanism which drives the cutter blade when the drive block is engaged. When not fitted with blades place a rubber band around the head to hold the carrier over the drive block - thus avoiding the loss of the drive block.
When replacing check laminated spring riveted sets on both sides for wear/damage.
This part will also fit the following Heiniger models:
Heiniger heavy duty cattle clipper
Heiniger 12v cattle clipper
Part number: 706-503
See clipper head diagram above for parts location - item 2
Price: £47.52 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Crank spindle sleeve
Product code: 706-505
Heiniger "Handy" mains powered clipper - Crank spindle sleeve
Part number: 706-505
See clipper head diagram above for parts location - item 3
Price: £13.20 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Crank spindle
Product code: 706-506
Heiniger "Handy" mains powered clipper - Crank spindle
Part number: 706-506
See clipper head diagram above for parts location - item 4
Price: £13.36 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Drive block
Product code: 706-507
Heiniger "Handy" mains powered clipper - crank drive block
Part number: 706-507
See clipper head diagram above for parts location - item 57
Price: £5.52 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Cog
Product code: 701-830
Heiniger "Handy" mains powered clipper - 31 tooth brown gearwheel cog only
(Please note: This part is not fitted nor supplied with the spindle)
Part number: 701-830
See clipper head diagram above for parts location - item 6
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
.
Price: £23.10 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Tension screw
Product code: 706-509
Heiniger "Handy" clipper - Tension screw
The tension screw is supplied without the distance screw - which is a separate part number 706-510 - see clipper head diagram above.
Part number: 706-509
See clipper head diagram above for parts location - item 7
Price: £9.68 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Distance screw
Product code: 706-510
Heiniger "Handy" clipper - Distance screw
The distance screw is supplied without the tension screw - which is a separate part number 706-509 - see clipper head diagram above.
Part number: 706-510
See clipper head diagram above for parts location - item 8
Price: £2.95 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Pressure plate
Product code: 706-511
Heiniger "Handy" clipper - Pressure plate
Part number: 701-511
See clipper head diagram above for parts location - item 9
Price: £10.19 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Centering ring
Product code: 706-514
Heiniger "Handy" clipper - Centering ring
Part number: 706-514
See clipper head diagram above for parts location - item 10
Price: £2.38 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Spiral spring
Product code: 706-517
Heiniger "Handy" clipper - Spiral spring
Part number: 706-517
See clipper head diagram above for parts location - item 11
Price: £2.03 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Laminated spring
Product code: 706-518
Heiniger "Handy" clipper - Laminated spring riveted - one
Laminated springs form part of the mechanism of the driving carrier.
Each laminated spring riveted set contains three springs riveted together.
When one side is damaged it is good practice to change both sides.
This part will also fit the following Heiniger models:
Heiniger heavy duty cattle clipper
Heiniger 12v cattle clipper
Heiniger Delta clipper
Heiniger Progress clipper
Part number: 706-518
See clipper head diagram above for parts location - item 12
Price: £15.23 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - PH Screw M5 x 16
Product code: 706-520
Heiniger "Handy" clipper - PH Screw M5 x 16
Part number: 706-520
See clipper head diagram above for parts location - item 13
Price: £0.40 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - PH screw M16x16
Product code: 706-521
Heiniger "Handy" mains powered clipper - Blade fixing screw (1 only)
Screws used to hold bottom plate blade in place on the clipper head.
Part number: 706-521
See clipper head diagram above for parts location - item 14
Price: £5.39 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Circlip
Product code: 706-524
Heiniger "Handy" mains powered clipper - Circlip for cog
This part will also fit the following Heiniger models:
Heiniger heavy duty cattle clipper
Heiniger 12v cattle clipper
Heiniger Delta clipper
Heiniger Progress clipper
Part number: 706-524
See clipper head diagram above for parts location - item 16
Price: £0.35 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - PH Screw M3 x 6
Product code: 706-525
Heiniger "Handy" clipper - PH Screw M3 x 6 - (one only)
This screw is used to secure the laminated spring.to the drive carrier.
Part number: 706-525
See clipper head diagram above for parts location - item 17
Price: £1.98 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Carbon brush with spring
Product code: 701-633
Replacement single carbon brush and spring for the Heiniger "Handy" model.
PLEASE NOTE! This item does not include the inner screw cap (Item number 26) as shown on the body diagram which is a separate order item.
Part number: 701-633
As shown on the clipper body diagram above - item number 24
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
The following Heiniger models use the same carbon brush and spring replacements.
Heiniger "Heavy duty cattle clipper"
Heiniger "Xtra" Sheep shearing machine
This carbon brush and spring is NOT suitable for the Heiniger Delta model.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £15.89 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Brush cap
Product code: 701-634
Heiniger "Handy" clipper - Brush cap - one
Screws into the carbon brush and spring sleeve on the side of the clipper handpiece to retain the spring and brush.
NOTE: Not supplied with carbon or springs.
Part number: 701-634
As shown on the clipper body diagram above - item number 25
This part item can also be used on the Heiniger "Xtra" heavy duty cattle clipper
Price: £1.61 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" clipper - Dust cover
Product code: 701-627
Heiniger "Handy" clipper - Dust cover
Part number: 701-627
As shown on the clipper body diagram above - item number 22
Price: £4.22 (Including: VAT at 20%)
|
|
|
 | Heiniger "Handy" - UK cable 240v
Product code: H05RNF
5m UK cord assembly complete with 3-pin UK plug
Part number: H05RNF
See diagram above - item 34
(Not supplied with item 21)
IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice
Price: £22.18 (Including: VAT at 20%)
|
|
