| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Hauptner 2000s - Armature assembly
Product code: 89500.720
Hauptner 2000 Shearing machine - Armature assembly complete with fan unit attached
Part number: 89500.720
This is the latest armature for all Hauptner models with the serial number prefix "C" as shown on the identification plate of the clipper - see image.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
IF YOU FEEL YOU NEED TO DISCUSS YOUR CLIPPER REQUIREMENTS OR WANT FURTHER ADVICE
please contact us on Tel: 01424 882900
Price: £105.91 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Circuit board assembly - 180-watts
Product code: 89500.560
Hauptner 2000 Shearing machine - Circuit board assembly
Part number: 89500.560
This circuit board assembly should be used only on Hauptner 2000 models fitted with 180watt motors as stated on the identification plate found at the rear of the clipper hand piece beneath the air filter. (See diagram)
These circuit boards are interchangeable with the both 180watt machine and the latest models with the prefix "C" at the start of the serial number (part number 89500.510)
They are not suitable for use in the early Hauptner 30 watt machines, which need the part number 89500.440.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Price: £67.37 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Circuit board assembly
Product code: 89500.510
Hauptner 2000 Shearing machine - Circuit board assembly
Part number: 89500.510
There are three production models variations of the Hauptner 2000
Early production with motors, marked "30-watts" or "50-watts"
Production with motors, marked 180-watt
Current production with motors, marked with the prefix "C" at the start of the serial number.
This circuit board assembly can be used on Hauptner 2000 models with motors, which are registered with the prefix "C" at the start of the serial number as marked on the identification plate found at the rear of the clipper hand piece beneath the air filter. (See diagram)
These circuit boards are also interchangeable with the earlier 180-watt models of the Hauptner 2000.
IMPORTANT UPDATE:
Early production Hauptner 2000 models with motors, which are marked "30-watts" or "50-watts"on the identification plate found at the rear of the clipper hand piece beneath the air filter. (See diagram) were normally fitted with part number 89500.400.
However we are informed by Hauptner that with effect 1st October 2009 part number 89500.400 has now been superseded by part number 89500.510 - the part normally used for Hauptner 2000 models displaying the prefix "C" at the start of the serial number.
This Circuit board assembly can therefore now be used on all Hauptner 2000 machines
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Price: £74.18 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Toothed gear wheel
Product code: 89500.080
Hauptner 2000 Shearing machine - Toothed gear wheel without shaft
Part number: 89500.080
See diagram above.
Price: £14.65 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Reset switch
Product code: 89200.880
Hauptner 2000 Shearing machine - also referred to as the overload or overcharge switch
Part number: 89200.880
See diagram above.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £24.92 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Carbon brush with spring
Product code: 89500.430
Hauptner 2000 Shearing machine - carbon brush and spring - one brush and spring only
Part number: 89500.430
Replacement carbon brush and spring for the Hauptner model 2000
Carbon brushes need to be checked every 300/400 working hours for wear.
Brushes need to be checked by an authorised engineer at an approved service centre especially as special tools are needed to open the clipper body casing.
Worn carbon brushes can damage the motor and armature!
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £5.33 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Eccentric ball
Product code: 87200.050
Hauptner 2000 Shearing machine - Eccentric ball.
Part number: 87200.050.
See diagram above for location.
Price: £10.82 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Fitting screw
Product code: 89600.090
Hauptner 2000s - Fitting screw.
Part number: 89600.090
See machine head diagram above
Price: £4.50 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Fork guide bracket
Product code: 89600.180
Hauptner 2000 Shearing machine - Fork guide bracket.
Part number: 89600.180
See machine diagram above
Price: £19.69 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Fork finger - Right
Product code: 89220.190
Hauptner 2000s - Fork finger - Right
(As looking down on the clipper head)
Part number: 89220.190
See machine head diagram above
Price: £7.76 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Fork finger - Left
Product code: 89200.200
Premier 3000/4000s - Fork finger - Left
(As looking down on the clipper head).
Part number: 89220.200
See machine head diagram above
Price: £7.76 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Spring
Product code: 87200.760
Hauptner 2000s - Spring
Part number: 87200.760
See machine head diagram above
Price: £4.01 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Nut
Product code: 87200.750
Hauptner 2000s - Nut
This nut together with a bolt form part of the retaining spring components.
Part number: 87200.750
Shown on the head diagram above
Price: £0.66 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Bolt
Product code: 88000.060
Hauptner 2000s - Bolt
This bolt together with a nut form part of the retaining spring components.
Part number: 88000.060
Shown on the head diagram above
Price: £0.43 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Washer
Product code: 87200.770
Hauptner 2000s - Washer
This washer together with a bolt and nut form part of the retaining spring components.
Part number: 87200.770
Shown on head diagram above as part of spring assembly
Price: £0.53 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Double spherical head bolt
Product code: 87200.790
Hauptner 2000s -Double spherical head bolt
Part number: 87200.790
See diagram above
|
|
|
 | Hauptner 2000s - Cutter retainer
Product code: 89230.210
Hauptner 2000 Shearing machine - Cutter retainer
Part number: 89230.210
NB: In some instruction manuals this part is referred to as part number 88230.210
this is a publishing error - the correct part number is as given above - 89230.210
See machine head diagram above
Price: £9.55 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Screw
Product code: 87200.740
Hauptner 2000 - Screw - one only
Part number: 89600.000
Screw for holding the spring near to the cutter retainer
Shown on diagram above
Price: £0.26 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Air filter
Product code: 89100.960
Hauptner 2000 Shearing machine - Air filter
Part number: 89100.960
See diagram above
Price: £9.74 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Screw for air filter
Product code: 89100.970
Hauptner 2000 - Screw for fixing the air filter (1 only)
Part number: 89100.970
See diagram above.
Price: £0.44 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - UK Cord assembly
Product code: 89500.470
HHauptner 2000 Shearing machine - UK Cord assembly
Part number: 89500.470
Standard cord assembly for Hauptner 2000
Suitable for either horse cattle or sheep shearing machine, complete with UK 3-pin adapter plug.
Not shown on diagram above.
IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice
Price: £21.84 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - EU Cord assembly
Product code: 89500.470-0
Hauptner 2000 Shearing machine - EU Cord assembly
Part number: 89500.470
Standard cord assembly for Hauptner 2000 -
Suitable for either horse cattle or sheep shearing machine,
complete with EU 2-pin moulded plug.
Not shown on diagram above
IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice
Price: £19.36 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Black shear head cover
Product code: 89600.020
Hauptner 2000 - Black shear head - front head cover
(NOT supplied complete with two fixing screws as shown.)
Part number: 89600.020
See machine diagram above
Price: £5.46 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - Heat Insulation Cap
Product code: 89600.040
Hauptner 2000s - Heat Insulation Cap
Right and left sides (two items)
Part number: 89600.040
See machine diagram above
Price: £5.63 (Including: VAT at 20%)
|
|
|
 | Hauptner 2000s - head to body screw
Product code: 89600.601
Hauptner 2000 Shearing machine - head to body screws complete with washer (2)
(The head to body screw for the 2000 shearing machine is 4mm shorter than the head to body
screws for the horse./cattle head
Screw size: M5x16mm
Part number: 89600.601
Price: £1.06 (Including: VAT at 20%)
|
|
