| |
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Parts are obtainable for 110v machines, but customers need to state at the time of ordering if their machine is 110v rated
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are non returnable
|
|
|
 | Hauptner 2000 - Armature assembly
Product code: 89500.720
Hauptner 2000 Armature assembly complete with fan unit attached
Part number: 89500.720
This is the latest armature for all Hauptner models with the serial number prefix "C" as shown on the identification plate of the clipper - see image.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
IF YOU FEEL YOU NEED TO DISCUSS YOUR CLIPPER REQUIREMENTS OR WANT FURTHER ADVICE
please contact us on Tel: 01424 882900
Price: £103.71 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Circuit board assembly - 180-watts
Product code: 89500.560
Hauptner 2000 - Circuit board assembly
Part number: 89500.560
This circuit board assembly should be used only on Hauptner 2000 models fitted with 180watt motors as stated on the identification plate found at the rear of the clipper hand piece beneath the air filter. (See diagram)
These circuit boards are interchangeable with the both 180watt machine and the latest models with the prefix "C" at the start of the serial number (part number 89500.510)
They are not suitable for use in the early Hauptner 30 watt machines, which need the part number 89500.440.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Price: £65.96 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Circuit board assembly
Product code: 89500.510
Hauptner 2000 - Circuit board assembly
Part number: 89500.510
There are three production models variations of the Hauptner 2000
Early production with motors, marked "30-watts" or "50-watts"
Production with motors, marked 180-watt
Current production with motors, marked with the prefix "C" at the start of the serial number.
This circuit board assembly can be used on Hauptner 2000 models with motors, which are registered with the prefix "C" at the start of the serial number as marked on the identification plate found at the rear of the clipper hand piece beneath the air filter. (See diagram)
These circuit boards are also interchangeable with the earlier 180-watt models of the Hauptner 2000.
IMPORTANT UPDATE:
Early production Hauptner 2000 models with motors, which are marked "30-watts" or "50-watts"on the identification plate found at the rear of the clipper hand piece beneath the air filter. (See diagram) were normally fitted with part number 89500.400.
However we are informed by Hauptner that with effect 1st October 2009 part number 89500.400 has now been superseded by part number 89500.510 - the part normally used for Hauptner 2000 models displaying the prefix "C" at the start of the serial number.
This Circuit board assembly can therefore now be used on all Hauptner 2000 machines
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Price: £72.64 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Reset switch
Product code: 89200.880
Hauptner 2000 - Reset switch - also referred to as the overload or overcharge switch
Part number: 89200.880
See diagram above.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £24.40 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Toothed gear wheel
Product code: 89500.080
Hauptner 2000 Toothed gear wheel without shaft
Part number: 89500.080
See diagram above.
Price: £14.35 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Eccenter shaft
Product code: 89500.060
Hauptner 2000 Eccenter shaft without gear cog,
Part number: 89500.060
Price: £22.31 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Carbon brush with spring
Product code: 89500.430
Hauptner 2000 carbon brush and spring - one brush and spring only
Part number: 89500.430
Replacement carbon brush and spring for the Hauptner model 2000
Carbon brushes need to be checked every 300/400 working hours for wear.
Brushes need to be checked by an authorised engineer at an approved service centre especially as special tools are needed to open the clipper body casing.
Worn carbon brushes can damage the motor and armature!
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £5.22 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Control lever switch
Product code: 89500.670
Hauptner 2000 - Control lever switch
Part number: 89500.670
On/off attached control lever switch - new design replacing existing switch mechanisums.
Please note: This does not include the actual switch, it is the switch internal mechanism only.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £2.61 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Screw for air filter
Product code: 89100.970
Hauptner 2000 - Screw for fixing the air filter (1 only)
Part number: 89100.970
See diagram above.
Price: £0.43 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Body screws
Product code: 89500.610
Hauptner 2000 Set of crew (2) for head to body fixing complete with locking washers (2)
Part number: 89500.610
See diagram above.
Price: £2.59 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Blade tension nut.
Product code: 89500.050
Hauptner 2000 blade tension nut.
Part number: 889500.050
See clipper diagram above for parts location.
Price: £4.85 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Blade tension bolt.
Product code: 86831.040
Hauptner 2000 blade tension bolt
Part number: 86831.040
See clipper diagram above for parts location.
Price: £3.96 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Blade tension spring.
Product code: 89500.030
Hauptner 2000 blade tension spring.
Part number: 89500.030
See clipper diagram above for parts location.
Tension springs
In isolated cases there may be a looseness or failure of the tension nut to remain in place - thereby allowing the tensioning of the machine to become incorrect with resulting poor clipping performance.
This could be due to a production problem with the spring on some earlier models and therefore they may need replacing with a correct spring.
Price: £2.02 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Upper blade guides
Product code: 86831.020
Hauptner 2000 upper blade guides - set of two
Part number: 86831.020
See clipper diagram above for parts location.
Price: £2.69 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Blade drive bush
Product code: 89500.110
Hauptner 2000 blade drive bush
Part number: 89500.110
See clipper diagram above for parts location.
Price: £1.50 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - Blade holding lugs
Product code: 89100.030
Hauptner 2000 blade holding lug - one only
Part number: 89100.030
See clipper diagram above for parts location.
Price: £1.42 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - UK Cord assembly
Product code: 89500.470
Hauptner 2000 - UK Cord assembly
Part number: 89500.470
Standard cord assembly for Hauptner 2000
Suitable for either horse cattle or sheep shearing machine, complete with UK 3-pin adapter plug.
Not shown on diagram above.
IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice
Price: £21.39 (Including: VAT at 17.5%)
|
|
|
 | Hauptner 2000 - EU Cord assembly
Product code: 89500.470-0
Hauptner 2000 - EU Cord assembly
Part number: 89500.470
Standard cord assembly for Hauptner 2000 -
Suitable for either horse cattle or sheep shearing machine,
complete with EU 2-pin moulded plug.
Not shown on diagram above
IMPORTANT!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
PLEASE NOTE:
Customers from the USA should be aware that operating machines and certain parts intended for 240v machines may not be suitable for the US electrical power supply. Clippers specifically made to 110/125v are need for the USA. Please seek qualified electrical advice
Price: £18.95 (Including: VAT at 17.5%)
|
|
