| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Hauptner 07 - Armature assembly
Product code: 89100.710
Hauptner "Rapide" 07 clipper armature assembly complete with fan unit attached
Part number: 89100.710
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £131.47 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Reset switch
Product code: 89100.880
Hauptner 07 - Reset switch - also referred to as the overload or overcharge switch
104-P30-0.5A
AC240v
DC 48V
Part number: 89100.880
See diagram above.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £24.92 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Gear wheel cog
Product code: 87100.080
40 toothed gear cog for the Hauptner 07 "Rapide"
Part number: 87100.080
See diagram above
Price: £16.08 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Internal gear wheel
Product code: 89100.130
Double internal gear wheel, with fibre and metal cogs and ball bearing surround set in brass.
(This is the modified internal gear wheel - hence the difference in product number - v - part number.)
Part number: As shown - 87100.130
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £39.97 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Condenser/capacitor
Product code: 89100.810
Hauptner 07 "Rapide"- Condenser/capacitor
Condenser/capacitor for the Hauptner 07 "Rapide"
BV 18 200/57 11.08
01 uF + 2x 2400pF X1Y2
250v- 50/60Hz 4A 25/100/04-C
EN 60384 14 (03)
Part number: 89100.810
See diagram above.
Price: £36.61 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Excenter shaft
Product code: 87201.060
Hauptner 07 Excenter shaft without gear cog,
Part number: 87201.060
Not shown on clipper diagram above
Price: £22.79 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Carbon brush spring
Product code: 89100.850
Replacement carbon brush spring for the Hauptner model 07 "Rapide" - one spring only -
Carbon brush not included.
Carbon brushes need to be checked every 300/400 working hours for wear.
Worn carbon brushes can damage the motor and armature!
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £1.50 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Carbon brush
Product code: 89100.840
Replacement carbon brush for the Hauptner model 07 "Rapide" - 1 brush only.
Spring not included.
Carbon brushes need to be checked every 300/400 working hours for wear.
Brushes need to be checked by an authorised engineer at an approved service centre especially as special tools are needed to open the clipper body casing.
Worn carbon brushes can damage the motor and armature!
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £3.46 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Carbon brush cap
Product code: 89100.860
Hauptner "Rapide" 07 clipper carbon brush screw cap
Screws in to secure spring and carbon.
Sold as single item not as a pair.
Part number: 89100.860
Price: £5.81 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Blade tension bolt.
Product code: 86831.040
Hauptner 07 blade tension bolt
Part number: 86831.040
See clipper diagram above for parts location.
Price: £4.04 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Blade tension spring
Product code: 86831.060
Hauptner 07 blade tension spring.
Part number: 86831.060
See clipper diagram above for parts location.
Price: £2.06 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Blade tension nut
Product code: 86831.050
Hauptner 07 - Blade tension nut
Part number: 86831.050
See clipper diagram above.
Price: £4.91 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Drive block.
Product code: 89100.110
Hauptner 07 - drive block.
Part number: 89100.110
See clipper diagram above for parts location.
Price: £1.54 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Upper blade guides
Product code: 89100.040
Hauptner 07 - Upper blade guides
These are seated in the clipper head and are positioned against the upper or cutter blade
Part number: 89100.040
Shown on the clipper diagram above - head insert.
Price: £2.90 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Blade holding lugs
Product code: 89100.030
Hauptner 07 blade holding lug - one only
Part number: 89100.030
See clipper diagram above for parts location.
Price: £1.45 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Rivet
Product code: 86831.100
Hauptner 07 - Rivet
Part number: 86831.100
Not shown on clipper diagram
Price: £0.26 (Including: VAT at 20%)
|
|
|
 | Hauptner 07 - Cable sheath
Product code: 89100.920
Hauptner 07 - 15cm rubber cable sheath
Part number: 89100.920
See parts diagram above
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £5.59 (Including: VAT at 20%)
|
|
