| |
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale on this web site are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
 | DOUBLE K - 401 clipper - fitting the cable
INSTRUCTIONS for fitting flexible drive cable to the DOUBLE K 401 POWER CLIPPER.
.....................................................................................................................................................
IMPORTANT! - AT ALL TIMES OBSERVE STANDARD ELECTRICAL SAFETY!
Do not attempt to switch on this machine without the appropriate electrical current converter unit
DO NOT ALLOW CHILDREN under the age of 18 years to attempt to use or handle this equipment at any time. Novices should only use this equipment with an experienced operator in attendance at all times.
Fully check your clipper - with blade fitted after fitting cable and before use on any animals.
.....................................................................................................................................................
When fitting the flexible cable shaft it is recommended that you have the motor connected to your mains power supply and switch on with the variable speed switch turned to the lowest power position - sufficient to just rotate the shaft.
To change a cable you need to unscrew the two counter sunk "Allen" screws in the alloy shaft at the end of the blue plastic cased motor - see figure: 1. To do this you will need a very small "Hex" or "Allen" key. Do not attempt to use a key which is not the right fitting otherwise you may damage the Allen screw.
DO NOT unscrew the two Philips type "Possidrive" headed screws as this will release the alloy adapter shaft from the plastic motor casing.
With the motor running at a slow speed insert the shaft pin into the rotating slot (see figure: 2) until it engages and you can confirm this by seeing the other end rotating. Once engaged refit the Allen screws securely.
With the motor still running at a slow speed engage the other end of the cable shaft into the rear end of the 401 clipper.
If correctly inserted you will see the clipper drive lever moving.
PLEASE NOTE:
Before attempting to use or operate the clipper we strongly recommend you attach suitable blades and check the machine is working correctly before applying to any animal.
|
|
|
 | DOUBLE K - 401 Power clipper- Shaft lever drive
Product code: DK516
DOUBLE K - 401 Power clipper- Shaft lever drive.
Supplied as shown in image without either flywheel (item 22) or circlip.
Please check if you need to renew either circlip
Item number 19 on the above clipper diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £17.63 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper- Clamp ball spring.
Product code: DK514
DOUBLE K - 401 Power clipper- Clamp ball spring.
This part fits over the handpiece power cable shaft insert and is normally encasing a small ball bearing which acts as a fastening clip to the inserted shaft end..
If not still in your possession you will need the ball bearing (Item number 29 on the above diagram) to complete the fastening of the shaft.
Item number 30 on the above clipper diagram
Price: £4.21 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Ball bearing
Product code: DK515
DOUBLE K - 401 Power clipper - Ball bearing 7/32 in steel
Ball bearing used in conjunction with the clamp ball spring above.
Item 29 on the above diagram
Price: £1.61 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper- Circlip
Product code: DK409
DOUBLE K - 401 Power clipper- Circlip - type SH 250.
Item number 25 on the above clipper diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.63 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper- Circlip
Product code: DK507
DOUBLE K - 401 Power clipper- Circlip - type SH 150.
Smaller circlip fitted at the rear of the drive shaft.
Shown on the above clipper diagram above at the rear of the shaft drive lever but not numbered.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.62 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Drive lever
Product code: DK598
DOUBLE K - 401 Power clipper blade drive lever.
Item number 33 on the above clipper diagram.
Un-screw the cover plate (item36) to reveal the drive lever beneath
Re fix cover plate after changing lever.
Price: £5.52 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Lever ball bearings
Product code: DK506
DOUBLE K - 401 Power clipper - Lever ball bearings .125 ID
Item 21 on the above diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £21.46 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Lever ball bearing
Product code: DK505
DOUBLE K - 401 Power clipper - Lever ball bearings .25 x .60
Item 20 on the above diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £15.20 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Latch
Product code: DK3025
DOUBLE K - 401 Power clipper blade latch assembly.
Item number 28 on the above clipper diagram.
This part is normally fitted with the blade hinge assembly - part number 510 - as seen above.
.
PLEASE NOTE:
Ensure the two hair thin metal spring sprigs protruding from the hinge assembly (see red arrows) are both correctly seated in the small pin sized holes on the right and left hand sides of the latch assembly as these are essential to the latch release control working correctly.
The latch release assembly is located and fixed behind the hinge assembly.
Position and keep both in place before re-screwing both the latch and hinge to the clipper head.
Price: £2.42 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Hinge
Product code: DK510
DOUBLE K - 401 Power clipper blade hinge assembly.
Item number 42 on the above clipper diagram.
Unscrew the hinge assembly from the clipper head, and fit the new latch assembly taking care to ensure the two hair thin metal spring sprigs (see red arrows) are both correctly seated in the small pin sized holes on the right and left hand sides of the latch assembly as these are essential to the latch release control working correctly.
This part is normally fitted with the blade latch assembly - part number 3025.
PLEASE NOTE:
Customers may consider it prudent to renew the latch assemble when re-placing the old hinge assembly.
Price: £8.14 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Upper clipper casing
Product code: DK517
DOUBLE K - 401 Power clipper upper body casing.
Item number 35 on the above clipper diagram.
Black plastic clipper upper casing for fitting to the lower body casing..
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £16.69 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper - Lower clipper casing
Product code: DK512
DOUBLE K - 401 Power clipper lower body casing.
Item number 27 on the above clipper diagram.
Black plastic clipper lower casing fitted with alloy sleeve for shaft.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £23.50 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper- Felt seals
Product code: DK508
DOUBLE K - 401 Power clipper- Felt seals - each
Item number 34 on the above clipper diagram.
Specially designed for insertion either side of the drive lever
It is advisable to replace both felts at the same time.
Remember to oil the seals well before installing.
Price: £0.85 (Including: VAT at 17.5%)
|
|
|
 | DOUBLE K - 401 Power clipper- Switch rotary rheostat
Product code: DK412
DOUBLE K - 401 Power clipper- Switch rotary rheostat.
Switch for power unit assembly.
Item number 11 on the above clipper diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £87.06 (Including: VAT at 17.5%)
|
|
