ATTACHMENT COMBS Attachment combs are normally made of a plastic component, although some do have metal blades. The "snap" on type comb with the expanding clasp which clips over the rear of the blade, are generally intended for the "detachable type blades as used by most professional dog clippers.
Attachment combs do not fit on traditional type clipper blades, they are intended to be fitted on/over the "detachable" type "narrow" blades as used by most dog groomers. They are not intended to fit the "detachable" wide type blades as used for large dog breeds or for full body horse clipping.
Combs can only be attached to "detachable" narrow blades from blade size#50 to size #8.5. Blades from size#7 downwards will not accommodate the comb attachment, due to the increasing size of the comb blade.
The purpose of the attachment comb is to leave a greater length of un-cut hair than the blade alone would normally leave. The alternative to this method is to buy one of the special depth blade (Blades from size#7 down to size#3 all of which leave specific lengths of un-cut hair.
It is important to remember however that if you use an attachment comb you must be very particular with the grooming of the coat. There MUST NOT be any tangles or knots - otherwise the comb may come off the blade, it may well refuse to pass through the hair, and the clipping process may be painful to the animal!
|
|
|
 | ANDIS COMBS - 4 comb set - MBG Clipper
Product code: CBG0222
Four robust plastic "clip on" blade attachment combs for use on the Andis MBG clipper fitted with size #10 detachable only.
Comb sizes:
1/8th - inch
1/4th - inch
3/8th - inch
1/2 -inch
Price: £4.50 (Including: VAT at 17.5%)
|
|
|
 | ANDIS COMBS - 9 piece set - small sizes
Product code: CBG0220
Nine piece plastic comb set with universal fittings to suit A 5 clipper blade types. Self adjusting dual spring loading posi-grip clamp.
No tools required to apply, simply clip over the blade of your clipper.
The comb set includes the following sizes:
#7 - 1/16th 1.5mm
#6 - 1/8th 3mm
#5 - 3/16th 5mm
#4 - 1/4th 6mm
#3 - 5/16th 8mm
#2 - 3/8th 10mm
#1.5 - 7/16th 11mm
#1 - 1/2" - 13mm
#1/2 - 9/16th 14mm
Attachment combs work best with blade sizes #40, #30, #15 and #10. They generally do not fit blades below #8.5 which are themselves designed to leave greater depths of hair.
Attachment combs only work effectively on coats that have been thoroughly groomed and are without any tangles or knots.
Price: £15.94 (Including: VAT at 17.5%)
|
|
|
 | ANDIS COMBS - 8 piece set - large sizes
Product code: CBG0221
Eight piece plastic comb set with universal fittings to suit A 5 clipper blade types. Self adjusting dual spring loading posi-grip clamp.
No tools required to apply, simply clip over the blade of your clipper.
The comb set includes the following sizes:
#0 - 5/8th 16mm
#1/4 - 11/16 17mm
#A - 3/4" 19mm
#B - 13/16th 21mm
#C - 7/8th 22mm
#D - 15/16th 24mm
#E 1" - 25mm
#F - 1.25" 32mm
Attachment combs work best with blade sizes #40, #30, #15 and #10. They generally do not fit blades below #8.5 which are themselves designed to leave greater depths of hair.
Attachment combs only work effectively on coats that have been thoroughly groomed and are without any tangles or knots.
Price: £15.94 (Including: VAT at 17.5%)
|
|
