Advanced
Online Catalogue
>
CLIPPERS & TRIMMERS
>
Mains powered clippers
>
Angora Goat clippers
AESCULAP FAVORITA II
Product code: C0019
Manufacturer
AESCULAP Germany
Type
GT 104 model, Mains powered
Usage-type
Professional light duty
Wattage rating
35 watts
Voltage rating
230v
Field of Use
Dogs/small animals/veterinary
Weight Type
0.625 KG with blade fitted
Length Type
8-inches/23cm
Noise Level Score
3
Overload protection
Internal
Air Filters
One - positioned at rear
Cutting strokes
No information given
Cutting speeds
One
Casing colour
Red
Blade range
Total of 17 blades
Alternative blades
None
Blade type
Detachable type with tensioning bolt
Blade tensioning required
When necessary
Balance, & ease of use
Very good
On/Off switch position
Accessible to thumb for quick operation
Cable length
3.8m
Supplied with
Plastic case/GT710 - 1.8 mm blade set/oil/manual
Optional extras
Blade storage case/wall holder
Guarantee
One year
Electrical ratings
CE rated
PEASRIDGE star rating: FIVE STAR
Rating 95%
HIGHLY RECOMMENDED/OUTSTANDING
+ GERMAN! - Can one say more? Exceptional quality - built to last!
- Expensive? Yes! Such is the price of Quality!
GENERAL PRODUCT INFORMATION:
If you want a small but powerful professional clipper, both comfortable and quiet to use on Angora goats, which is designed to give years of service, then the German made Aesculap Favorita II is probably the only one made to fit that criteria!
The cheaper economy type dog clippers are fine! Thousands of people use them, many hundreds are repaired every year, not always the fault of the clippers, end-users contribute to many unnecessary repairs, but equally - many are repaired due to quality faults!
The Aesculap Favourita II is probably the only professional small animal-grooming clipper still manufactured to a standard in which quality, reliability and long levity are the prime concerns.
Made by Aesculap who are part of the of the German company - B Braun GmbH - a multinational company, internationally famous for decades, for its pioneering and leading involvement in both veterinary and human medical equipment. Today recognised as the specialists in their field, the design, engineering and finished quality of all their products is typically German and virtually unbeatable!
Aesculap have never been cheap! An Aesculap product will always costs more than a more cheaply made item, but often buying the best quality and paying a little extra, reaps lasting dividends in the long run! A lesson so often learnt the hard way!
Designed over a decade ago, it is today still unmatched. The innovative design and attractive style of the slim shaped handpiece, incorporates a combination of balance and lightness, to ensure the operator precision clipping to the highest standards. We particularly like the side positioned "on-off" switch designed and positioned for easy and safe operation.
A number of features lift this machine into a superior category, including the ball bearing universal motor, which provides great durability and long life, with almost total vibration free running. The ventilation system eliminates aspects of overheating, ensuring suitability for prolonged use. The air filter can be easily cleaned and the motor is encased in an unbreakable casing.
The Aesculap Favorita II is also an excellent choice beyond the realms of it main use as a dog clipping machine, for clipping Angora Goats and many breeds of Rabbits. In fact all over Europe it is one of the recognised clippers for the Angora breeds.
The GT746 blade is recommended for use on both goats and rabbits.
The Aesculap Favorita II when fitted with an Aesculap GT749 wide blade has the potential to clip any nervous horse!
Normally the Aesculap Favourita II is sold in the UK without a blade - However it is our policy to sell it complete with a blade therefore ready for immediate use! We supply you with the clipper and a GT710 - 1.8 mm general-purpose blade set
(Is there anything more annoying than buying a clipper and then being told you need to then buy a blade as well before you can use it?)
"BUY" AWARD
We don't make a habit of giving a "BUY" recommendation. Products can only qualify by being of special value and effectiveness in their field of use.
In the case of this product we are happy to award a
"BUY"
recommendation.
AESCULAP FAVOURITA II BLADE RANGE:
GH 700 - 1/20mm
GH 703 - 1/10mm
GT 710 - 1.8mm
GH 712 - 1mm
GH 715 - 2mm
GT 730 - ½ mm
GT 736 - 1mm
GT 746 - 1.5mm
GT 742 - 2mm
GT 748 - 3mm
GT 754 - 3mm
GT 758 - 5mm
GT 770 - 7mm
GT 772 - narrow blade
GT 779 - 9mm
GT 782 - 12mm
GT 784 - 16mm
GT 749- 1.8mm wide
IMPORTANT! - CLIPPER VOLTAGE RATING -
The electrical machines we offer for sale are principally for use with the electrical supply system operation in the UK namely 240volt. This machine is there equipped with a suitable voltage motor and component parts and will have a supporting identification plate on the casing. In addition to working on the UK electrical system it can normally be used on any European 220/240 volt system.
However it is supplied with a UK 3-pin plug and therefore will need an appropriate "adaptor" plug into which the UK 3-pin will fit. Whilst these are not readily available to us they can be usually easily obtained at your local electrical outlet.
Customers out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician.
USA Customers should note that with a national 110-volt electrical supply system 240-volt products will need specialist converter equipment and may still not work. It is recommended that you seek professional advice from a qualified electrician before making a purchase.
IF YOU FEEL YOU NEED TO DISCUSS YOUR CLIPPER REQUIREMENTS OR WANT FURTHER ADVICE
please contact us on
Tel: 01424 882900
IMPORTANT! - PEASRIDGE - unlike other outlets supply this clipper WITH A BLADE - GT 710 general purpose 1.8mm blade
Price: £233.00
(Including: VAT at 17.5%)
MOSER "ARTIKO" - Type 1245
Product code: C0067
Manufacturer
MOSER Germany
Parent Company
Wahl Clipper Corporation USA
Type
Mains rotary motor
Usage-type
Professional light duty
Wattage rating
45watts
Voltage rating
220/240v 50/60Hz
Field of Use
Horses/goats/dogs/veterinary
Weight Type
0.46 KG
Length
7.5-inches/19.5cm clipper only
Noise Level Score
2+
Overload protection
Circuit protector fuse
Air Filters
One at the rear
Cutting strokes
Slow speed: 2400 spm. Fast speed: 3000 spm
Cutting speeds
Two
Casing colour
Black
Blade range
Total of 15
Alternative blades
Andis/Laube/ Oster/Thrive/Wahl
Blade type
Narrow - detachable self tensioned
Blade tensioning required
No
Balance, & ease of use
Excellent
On/Off switch position
Rear mounted in-accessible to fingers for quick operation
Cable length
Average 10ft
Supplied with
Carry case/standard Cera blade #10 wide/oil/brush/instruction leaflet .
Optional extras
Attachment combs/Blade cases
Guarantee
One year
Electrical ratings
CE rated
PEASRIDGE star rating: FIVE STAR
Rating 95%
HIGHLY RECOMMENDED
+ Impressive light duty small clipper on most breeds of horses, certainly with the CeraBlade on of the best of its type. Ideal for the nervous animal.
- Slightly limited range of existing wide blades. Rear positioned on/off switch.
GENERAL PRODUCT INFORMATION:
The Moser Artiko is a cloned copy of the highly successful Moser Max 45 - one of the most powerful dog clippers on the market. For the owner of a small stud of Angora goats or a few traditional haired goats, or milkers, this machine offer considerable potential for the purposes of routine clipping.
As the clipper uses "detachable" blades this removes the need for tensioning of blades, added to which goat owner can enjoy a vast range of blades to select from, all of which will be able to cope with most clipping situations. When doing full body clipping two blades are a wise precaution, just in case one suddenly goes blunt, which in fairness can happen with any make of clipper.
Equipped with an efficient two-speed 45w motor, it has all the superior qualities associated with a quality German built product. The attractive style of the casing enhances a shaped handpiece, giving the combination of balance and lightness, which will be popular with many female users. Various features put this machine into a superior category, especially the ability to operate at two speeds and over prolonged periods without any signs of overheating. With a very acceptable noise level it is almost vibration free.
MOSER CERABLADE BLADE RANGE
Moser # 2.3mm Cera wide ceramic hardened
Moser #3mm Cera standard narrow
MOSER STEEL WIDE BLADE RANGE
Moser #2.3mm wide steel blade
WAHL "Competition Series" NARROW BLADE RANGE
Wahl #50 - 0.4mm cut
Wahl #40 - 0.6mm cut
Wahl #30 - 0.8 mm cut
Wahl #15 - 1.5mm cut
Wahl #10 - 1.8mm cut
Wahl #9 - 2mm cut
Wahl #8.5 - 2.8mm cut
Wahl #7 - 3.8mm cut
Wahl #7F - 3.8mm cut
Wahl #5 - 6mm cut
Wahl #5F - 6 mm cut
Wahl #4 - 8mm cut
Wahl #4F - 8mm cut
Wahl #3F - 10mm
WAHL "Competition Series" WIDE BLADE RANGE
Wahl #10 - 2.5mm Extra wide cut
ANDIS/OSTER/THRIVE/WAHL BLADES can be fitted to this clipper.
IF YOU FEEL YOU NEED TO DISCUSS YOUR CLIPPER REQUIREMENTS OR WANT FURTHER ADVICE
please contact us on
Tel: 01424 882900
Price: £129.99
(Including: VAT at 17.5%)
Online Catalogue
>
CLIPPERS & TRIMMERS
>
Mains powered clippers
>
Angora Goat clippers
