Homepage
 
The Natural home for animal grooming! 
 
 
Peasridge S S Limited
Site Map
Contact Us
Terms & Conds
 
 
Advanced 
 
View Basket
Checkout
   
Home
Catalog
Up
Login


ANDIS "UltraEdge" narrow detachable blades have rapidly become one of the most popular blade ranges used by cat and dog groomers, and no doubt much of the popularity arises from the sheer size of the blade range and its clipping scope, not to mention the recent introduction of the greater depth of hair leaving blades - namely the 5/8th and 3/8th - 16 and 19mm respectively!

Other manufactures appear to date slow to appreciate the popularity of these less close cutting blades which allow for a more desirable coat length, and do away with the use of the attachment comb.

With a ultra narrow toe blade for paws and a coat block blade plus a "T" shaped wide blade the range is greater than any current competitor's offerings.

Customer should note:
Narrow detachable small animal blades:

The blades clipping to the closest distance from the skin - thus leaving the least hair will be the highest blade number (#40)

Blades leaving increasing depths of hair start generally from blades size# 7 and downward in numerical numbering.

Blade sizes #40 to size #8.5 are of one style but varying cutting depths generally, and it is usual for them to have a smooth back on the lower plate.

From blade size 7 to the last blades in the range - which may be a 3 or ¾ size, the blades generally split into two distant types - the "full" tooth style blade or the "skip" tooth blade.

A "skip" tooth blade is a blade were the teeth of the lower plate (comb) alternate from one long with one short across the cutting face. This allows for a "scissoring effect when applied rather than a smooth finish. Often referred to as a "blending" blade.

A "full" tooth blade, is one marked "F" after the blade size number, or in some cases "FC" is a "full" or "full cut" blade indicating that it gives a smooth velvet style finish when used.

Thus blades marked as "#7" will invariably be a skip tooth blade, whereas a blade marked #7F or #7FC will be a full tooth blade.

Both "full" tooth blades and or "skip" tooth blades may be ribbed or have a plain surfaced on the lower blade plate. Some manufacturers claim the ribbed effect helps to keep the blade cooler.

A "corduroy" marked effect can sometimes be seen on a smooth coat such as a horse when a ribbed blade is used. Its effects are short termed however and usually disappear within 24/48hrs of being clipped.

The mm depth cutting size can, and may, often vary by a small amount from one manufacturer to another.

BLADES - ANDIS - #40 - 0.25mm BLADES - ANDIS - #40 - 0.25mm
Product code: CB0248

Andis ref: UltraEdge #64076
Cuts to: 1/100" - 0.25mm
Cutting face width: 40mm
Chrome plated finish.
A surgical blade

A popular blade for many veterinary practices, it is widely used for surgical preparation as it clips ultra close to the shin. Also used in laboratory work.

Surgical blades of this size can often be found to be suitable for the "hogging" of horse's manes especially polo ponies. Will also work on some horses "hairy" legs - not guaranteed - but often very successful!

In the field of cattle this blade will give a very close finish and is used often for trimming dairy cattle udders, or for preparing the show "top-lines" Can be also used for freeze branding preparation.

Used for heads of Charollias sheep for show trim to remove small areas of both hair and wool, also for cleaning legs for show purposes.

In a majority of cases for dog grooming when used by a competent groomer or experienced exhibitor this blade produces a high quality show finish (very close) on the face, feet or tails of a Poodle with excellent skin and coat qualities. Very useful blade for preparing the underbelly of a pregnant bitch just before delivery, the blade is used to skim the area clean providing the skin underneath has no abrasions.

Useful blade when used on a number of mixed breeds. Dogs should be well groomed out before clipped. Popular blade for dealing with difficult and dense mats.

One of the most popular blades for use with attachment combs. A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Note however comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade

 



Price:   £19.95 (Including: VAT at 17.5%)



BLADES - ANDIS - #30 - 0.5 mm BLADES - ANDIS - #30 - 0.5 mm
Product code: CB0249

Andis ref: UltraEdge #64075
Cuts to: 1/50" - 0.5mm
Cutting face width: 43mm
Chrome plated finish.
A fine close blade

Often used in dog grooming circles on the face and feet of either a black or brown Poodle, especially for show purposes.

It can be used with a clip on blade attachment for the removal of excess body coat, and is also used on Schnauzer ears but will be a fraction closer than the Oster#30.

Use in conjunction with a comb attachment to achieve a smart finish to a Poodle with a longer coat or to give the appearance of a hand scissored look on a mixed breed or a long coated terrier.

A range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £19.95 (Including: VAT at 17.5%)



BLADES - ANDIS - #15 - 1mm BLADES - ANDIS - #15 - 1mm
Product code: CB0250

Andis ref: UltraEdge #64072
Cuts to: 3/64th" - 1.2mm
Cutting face width: 43mm
Chrome plated finish.
A close blade

When used against the grain this blade gives a closer cut than the #30 blade. It produces a really nice finish on the top of the head and back of the neck of a densely coated Schnauzer, but the finish is too close for the Schnauzer bodywork.

Works well on Terrier ears when working with the lay of the coat. Good blade to use when dealing with mats that are packed tight to the skin. Work of this nature must however be done slowly and with considerable care.

It will easily skim the coat from the under belly and topside inside of the back legs on any breed.

The size #15 blade is said to be one of the most versatile of dog blades, and is often a popular choice for many dog-grooming contests.

Widely used in many of the various Poodle clips:-

Dutch clip: feet/face/eyes/side-stomach/tail.

Kennel & Lamb clips: face/feet/tail.

Puppy clip: face/feet/tail.

Royal Dutch clip: face/feet/tail and a wider strip down the side and possibly the back.

Summer clip: face/feet/tail

Town & Country clip: face/feet/tail/body pattern

N.B. For Poodles with sensitive skins use a Oster #10 for the face.

The #15 blade is also used on the ears of the Airedale Terrier, face ears and part of the tail of the Bedlinton Terrier, the ears of the Cairn Terrier. For Cocker Spaniels it is used on the face, ears, throat and the head, the top of the ears of the Dandie Dinmont Terrier, the English Setter, Kerry Blue Terrier, and the ear tips of the West Highland White Terrier.

In addition the blade is used on Irish Water Spaniels, Keeshond, Old English Sheep Dogs, Border Terriers and Yorkshire Terriers.

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £19.95 (Including: VAT at 17.5%)



BLADES - ANDIS - #10 - 1.5mm BLADES - ANDIS - #10 - 1.5mm
Product code: CB0251

Andis ref: UltraEdge #64071
Cuts to: 1/16th" - 1.5mm
Cutting face width: 43mm
Chrome plated finish.
A general purpose blade

The #10 blade is popular blade for use for general and underbody use on a wide variety of dog breeds and is often selected when a reasonably close and or smooth finish is required. Most professional dog groomers will have this blade and probable use it the most within their day-to-day work.

The #10 blade is a frequently selected blade for use on many cat breeds. A short but safe blades. Can often be used for matted cats coats, although in extremely bad cases a size #40 may have to be used.

A good blade use when going with the grain of the coat on the faces or light coloured Poodles, which are easily irritated. Used for the under belly work and also on the ears of terriers. Often selected as the blade to use when stripping off coats which have mats that are to close to the skin to permit the use of other blades. Universally used for bodywork on the Schnauzer.

This blade is especially recommended for use on necks, ears, and the throat of both Cocker, Fox, Irish and Welsh Terriers, ear tips of the West Highland White Terrier, necks and ears of the Lakeland and ears of the Airedale, Bedington, Cairn Yorkshire Terrier. Ideal for the face, feet and base of the tail of Poodles. Use for the ears and throat of Scottish and Sealyham Terriers, and the ears of the Silky Terrier. Use also for the tops of ears on both the English and Irish Setter.

Like the Oster #10 blade this Andis blade although 0.1mm finer should well suit the following breeds for either body or other areas of work:-

Affenpinscher/Afghan/Airedale/Australian Terrier/Bedlington Terrier/Bichon Fries/Border Terrier/Bonvier des Flandres/Briard/Brittany Spaniel/Brussels Griffon/Cairn Terrier/Chow Chow/Clumber Spaniel/Cocker Spaniel/Dandie Dinmont Terrier/English Cocker Spaniel/English Setter/English Toy & Field Spaniels/Gordon & Irish Setters/Irish Terrier/Japanese Toy Spaniel/Keeshond/Kerry Blue/Terrier/Lhasa Apso Maltese/Norwich Terrier/Old English Sheepdog/Otterhound/Pekingese/Pomeranian/All types of various Poodle clips/Puli/The Schnauzers - Giant/Standard/Miniature/Scottish & Sealyham Terrier/Shih Tzu/Silky & Sky Terriers/Sussex & Welsh Springer Spaniels/Welsh, West Highland, White and Wire Fox Terriers, and finally the Yorkshire Terrier - to name but a few!

Grooming Note: The #10 blade is often a good choice for Poodles with sensitive skins
A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £19.95 (Including: VAT at 17.5%)



BLADES - ANDIS - #9 - 2mm BLADES - ANDIS - #9 - 2mm
Product code: CB0257

If you clip with this blade with the grain of the coat you will get a slightly longer coat length finish than if you had used the Andis #8.5.at 2.8mm or 7/64th. A good blade to use when clipping the crown of the head and arch of the neck of a Cocker Spaniel. Also well worth using on the cheeks and front of the neck of sensitive Poodles to produce a very effective finish.

Useful blade for Sporting Breed's necks and sometimes bodies, produces a very smooth finish. Popular blade on Cockers, Springer's and Schnauzer bodies.

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

Comb lengths shown should be added to the blade depth.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £19.95 (Including: VAT at 17.5%)



BLADES - ANDIS - #8.5 - 2.8mm BLADES - ANDIS - #8.5 - 2.8mm
Product code: CB0262

Andis ref: UltraEdge #64070
Cuts to: 7/64th" - 2.8mm
Cutting face width: 43mm
Chrome plated finish.
A medium blade

A useful blade to use when clipping the crown of the head and arch of the neck of a Cocker Spaniel and similar sporting breeds. Also considered effective on the cheeks and front of the neck of sensitive Poodles to produce a very smart finish.

A wide range of attachment combs can be fitted over these blades to provide increased cutting length. Comb attachments should only be used on well-groomed coats and not those, which are tangled or matted.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £19.95 (Including: VAT at 17.5%)



BLADES - ANDIS - #7 - 3.2mm BLADES - ANDIS - #7 - 3.2mm
Product code: CB0263

Similar cut to its Oster A5 Cryotech counterpart (Oster #7 - skip tooth) with an equal cutting depth of 3.2mm. A popular blade for bodywork clipping on many dog breeds, looking for a tighter clip - especially for the summer months.

Popular blades for un-matted cats.

Groomers will find it effective in producing a good "blending" finish to the body, and other parts - hence it is a popular blade in many grooming parlours and is used on a wide range of dogs including: -

Few if any attachment combs can be fitted over these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £22.99 (Including: VAT at 17.5%)



BLADES - ANDIS - #7F - 3.2mm BLADES - ANDIS - #7F - 3.2mm
Product code: CB0252

Andis ref: UltraEdge #64121
Cuts to: 1/8th" - 3.2mm
Cutting face width: 43mm
Chrome plated finish.
Full cut body blade

Similar cut to its Oster A5 Cryotech counterpart (Oster #7F - full tooth) with an equal cutting depth of 3.2mm. A popular blade for bodywork clipping on many dog breeds, looking for a tighter clip - especially for the summer months.

Popular blades for un-matted cats.

Groomers will find it effective in producing a smooth finish, hence it is a popular blade in many grooming parlours and is used on a wide range of dogs including: -

Airedale: Often used on the head, throat, tail and body sides.
Cocker Spaniels: Used on the body, sides, back and the tail.
English Cocker Spaniel: Use on body, the sides, back and the front of the forelegs.
English & Irish Setters: Use for the body, sides and back.
English Springer Spaniel: Use on the body, sides, back and tail.

A popular blade for use on the Schnauzer for use onthe body, sides and back.

Can be used for body work on many of the various Poodle clips

Few if any attachment combs can be fitted over these blades to provide for increased cutting length.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £22.99 (Including: VAT at 17.5%)



BLADES - ANDIS - #5 - 6.3mm BLADES - ANDIS - #5 - 6.3mm
Product code: CB0264

Similar cut to its Oster A5 Cryotech counterpart (Oster #5 skip tooth) with an equal cutting depth of 6.3mm. A popular blade frequently used for bodywork purposes on many dog breeds when blending work is necessary.

As an alternative blade the #5F- full tooth it is often used on many breeds including the Bedington Terrier for the body, Cocker Spaniels, and English Springer Spaniels, use for body, sides, back and tails. On both English & Irish Setters use for body, sides and the back. For a shorter pet trim use on both Lhasa Apso & Maltese also use on the body of the Pekingese. Good blade for bodywork on the various Poodle clips.

Few if any of the usual selection of attachment combs will fit this blade.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £25.00 (Including: VAT at 17.5%)



BLADES - ANDIS - #5F - 6.3mm BLADES - ANDIS - #5F - 6.3mm
Product code: CB0253

Andis ref: UltraEdge #64122
Cuts to: 1/4th" - 6.3mm
Cutting face width: 43mm
Chrome plated finish.
Full cut body blade

Similar cut to its Oster A5 Cryotech counterpart (Oster #5F - full tooth) with an equal cutting depth of 6.3mm. A popular blade frequently used for bodywork on many dog breeds.

Used as an alternative blade to the #5 skip tooth it is a popular blade for use on many breeds including the Bedington Terrier for the body, Cocker Spaniels, and English Springer Spaniels, use for body, sides, back and tails. On both English & Irish Setters use for body, sides and the back.

For a shorter pet trim use on both Lhasa Apso & Maltese also use on the body of the Pekingese. Good blade for body work on the various Poodle clips.

Few if any of the usual selection of attachment combs will fit this blade.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £25.00 (Including: VAT at 17.5%)



BLADES - ANDIS - #4 - 9.5mm BLADES - ANDIS - #4 - 9.5mm
Product code: CB0265

Similar cut to its Oster A5 Cryotech counterpart (Oster #4 skip tooth) with an equal cutting depth of 9.5mm. A popular blade for bodywork on many low slung dog breeds. (West Highland White, Scottish, Cairn, etc.)

Consider this blade also for use - against the lie of the coat - on thick-coated Springer's or Cockers for a rather short but a very smooth look.

The #4 full tooth can be used as an alternative to the #4 for a pet trim involving short bodywork on Bichon Frise. Kerry Blue: Use this blade for the body, sides and back, and the tail.

As an alternative to the #4 blade for a shorter pet trim use the #4FC blade on Lhasa Apso, Maltese, Old English Sheepdog, Portuguese Water Dog, Shih Tzu, Silky & Yorkshire Terriers.

Use in respect of a short pet trim - body for the Pekingese and Soft coated Wheaten Terrier (throat included.)

Good blade for bodywork on the various Poodle clips.

Attachment combs do not fit this size of blade. Similar cut to its Oster A5 Cryotech counterpart (Oster #4 skip tooth) with an equal cutting depth of 9.5mm. A popular blade for bodywork on many dog breeds.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £26.50 (Including: VAT at 17.5%)



BLADES - ANDIS - #4F - 9.5mm BLADES - ANDIS - #4F - 9.5mm
Product code: CB0254

Andis ref: UltraEdge #64122
Cuts to: 1/4th" - 6.3mm
Cutting face width: 43mm
Chrome plated finish.
Full cut body blade

Similar cut to its Oster A5 Cryotech counterpart (Oster #4F full tooth) with an equal cutting depth of 9.5mm. A popular blade for bodywork on many dog breeds.

The #4 full tooth can be used as an alternative to the #4 for a pet trim involving short bodywork on Bichon Frise. Kerry Blue: Use this blade for the body, sides and back, and the tail

As an alternative to the #4 blade for a shorter pet trim use the #4FC blade on Lhasa Apso, Maltese, Old English Sheepdog, Portuguese Water Dog, Shih Tzu, Silky & Yorkshire Terriers.

Use in respect of a short pet trim - body for the Pekingese and Soft coated Wheaten Terrier (throat included.)

Good blade for body work on the various Poodle clips.

Attachment combs do not fit this size of blade.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £26.50 (Including: VAT at 17.5%)



BLADES - ANDIS - 3.75 - 13mm Skip tooth BLADES - ANDIS - 3.75 - 13mm Skip tooth
Product code: CB0256

Popular blade with a similar ability to the 3 ¾ FC but designed as a skip tooth blade. Now used in situations, when there is a call for a longer coat finish, and in many instances the blade does away with the need for a comb attachment in order to achieve a greater depth of “finished” coat.

A number of breeds benefit from use with this blade, these including the Bearded Collie, Shih Tzu, Silky and Yorkshire Terrier here the blade is used for the body aspect of the puppy trim.

Used for the body of the Poodle, the Portuguese Water Dog, the Bedington, West Highland, and Cairn Terriers, the body and side areas of the Bouvier Des Flandres. Used also on the body and tail of the Soft Coated Wheaten Terrier.

Suitable for a shorter body trim on the Pekingese and a shorter pet trim on the Old English Sheepdog. For a puppy trim finish it can be used on both the Lhasa Apso and Maltese, and for the body, back, sides and tail of the Kerry Blue Terrier.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £29.00 (Including: VAT at 17.5%)



BLADES - ANDIS - #3.75F - 13mm BLADES - ANDIS - #3.75F - 13mm
Product code: CB0255


Andis ref: UltraEdge #64135
Cuts to: 1/2" - 13mm
Cutting face width: 43mm
Chrome plated finish.
Full cut body blade


Similar blade to the AG/BG 3.75/13mm skip tooth, except that the FC blade gives a velvety and smoother finish. It has become a popular blade and is widely used in situations, when there is a call for a longer coat finish, and in many instances the blade does away with the need for a comb attachment in order to achieve a greater depth of “finished” coat.

A number of breeds benefit from use with this blade, these including the Bearded Collie, Shih Tzu, Silky and Yorkshire Terrier when the blade is used for the body aspect of the puppy trim. For a “Plush” look try it on the body of the Bichon Frise.

Used for the body of the Poodle, the Portuguese Water Dog, the Bedington, Terrier, the body and side areas of the Bouvier Des Flandres. Used also on the body and tail of the Soft Coated Wheaten Terrier.

Suitable for a shorter body trim on the Pekingese and a shorter pet trim on the Old English Sheepdog. For a puppy trim finish it can be used on both the Lhasa Apso and Maltese, and for the body, back, sides.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £29.00 (Including: VAT at 17.5%)



BLADES - ANDIS -  5/8" HT 16mm - Full tooth BLADES - ANDIS - 5/8" HT 16mm - Full tooth
Product code: CB0258

Andis ref: UltraEdge #64930
Cuts to: 5/8th" - 16mm
Cutting face width: 43mm
Chrome plated finish.
Full cut extra long body blade

An ideal blade for situations were a longer length of hair (16mm/5/8th -inch) is required to be left on the finished coat surface. Easier to use than an attachment comb, as it requires less grooming preparation before use.

Please note; Attachment combs do not fit this type of blade.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £35.00 (Including: VAT at 17.5%)



BLADES - ANDIS - #3/4 HT - 19mm BLADES - ANDIS - #3/4 HT - 19mm
Product code: CB0261

Andis ref: UltraEdge #63980
Cuts to: 3/4" - 19mm
Cutting face width: 43mm
Chrome plated finish.
Full cut extra long body blade

An ideal blade for situations where a longer length of hair is required.

The #3/4 HT blade leaves the most length of hair any detachable blade will clip too, with a finished clip of 19mm/¾-inch being left on the finished coat surface.

Easier to use than an attachment comb, as it requires less grooming preparation before use.

Please note: Attachment combs will not fit these blades.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £36.50 (Including: VAT at 17.5%)



BLADES - ANDIS - Blocking - 1.2mm BLADES - ANDIS - Blocking - 1.2mm
Product code: CB0259

Andis ref: UltraEdge #64335
Cuts to: 1/16th" - 1.2mm
Cutting face width: 55mm
Chrome plated finish.
Blocking blade

Wider blade ofen used for body blocking on larger dog breeds.

Popular blade in the USA for show work on exhibition cattle.

Please note: Attachment combs cannot be used with these blades.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £38.95 (Including: VAT at 17.5%)



BLADES - ANDIS - 5/8-inch Toe - 0.8mm BLADES - ANDIS - 5/8-inch Toe - 0.8mm
Product code: CB0260

Andis ref: UltraEdge #64960
Cuts to: 1/32nd" - 0.8mm
Cutting face width: 14mm
Chrome plated finish.
Toe blade

Blade designed exclusively for trimming the feet/toes of dogs/cats/small animals. Use for trimming in between the pads/toes.

Can be also used for the inner rim clipping of horse/cattle ears.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £29.00 (Including: VAT at 17.5%)



BLADES - ANDIS T- 84 - wide blade BLADES - ANDIS T- 84 - wide blade
Product code: CB0268

Andis ref: UltraEdge #21641
Cuts to: 3.32nd" - 2.4mm
Cutting face width: 60mm
Chrome plated finish.
Wide "T" shaped blade

T 84 blade has a cutting face of 65mm with 28 teeth on the comb blade making it suitable for use on a number of the larger dog breeds. Often used on horse, and spoken highly off!

In America the T84 blade has a popular following amongst those who prepare exhibition cattle and a number of persons clipping horses report satisfaction in it application .

Please note: Attachment combs cannot be used with these blades.

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Andis models: AG/AGC/AGR/MBG
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Alavon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 900N/50 range
Wahl models: Switchblade
 



Price:   £29.00 (Including: VAT at 17.5%)