Advanced
Online Catalogue
>
CLIPPER PARTS
>
Aesculap clipper parts
>
Aesculap GT474
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from
1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
IMPORTANT! - WHEN REQUESTING INFORMATION OR PARTS PLEASE QUOTE - MODEL NUMBER & PART NUMBERS as given on the diagrams.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale on this web site are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
AESCULAP "Econom Plus" model GT474 - Oscillating rocker
Product code: GT601304
AESCULAP "Econom" model GT474 - Oscillating rocker block
(also known as a drive block)
PLEASE NOTE:
This drive block will fit Aesculap models GT367 and GT674
Part number: GT601304
Shown on diagram above.
Price: £2.59
(Including: VAT at 17.5%)
AESCULAP "Econom Plus" model GT474 - Carbon brush and spring
Product code: GT374208
AESCULAP "Econom Plus" model GT474 - Carbon brush and spring 220/230v
Sold as individual item - one only - brush and spring complete.
Part number: GT374208
Shown on diagram above.
PLEASE NOTE:
Aesculap recommend that both carbon brushes are changed - not individual brushes.
The above part is intended for 220-230v machines only.
If you have a machines rated at US 110-125v you need a different part.
These brushes can be used of the "shearing" version of this model.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
IF YOU FEEL YOU NEED TO DISCUSS YOUR CLIPPER REQUIREMENTS OR WANT FURTHER ADVICE
please contact us on
Tel: 01424 882900
Price: £5.17
(Including: VAT at 17.5%)
AESCULAP "Econom" model GT474 - Oscillating spring
Product code: GT637202
AESCULAP "Econom" model GT 474 - Oscillating spring - one only
Part number: GT637202
Shown on diagram above.
This drive block will fit Aesculap models GT367 and GT674
PLEASE NOTE:
Aesculap recommend that all Oscillating springs are checked and are changed - not individual springs only.
There are a total of 3 springs per side of the yoke assembly.
Price: £2.24
(Including: VAT at 17.5%)
AESCULAP "Econom" model GT474 - Blade screw
Product code: GT610010
AESCULAP "Econom" model GT474 - Blade screw
Sold as individual item - one only
This blade screw can also be used on the Aesculap GT367 and 674 models
Part number: GT610010
Shown on diagram above.
Price: £8.92
(Including: VAT at 17.5%)
Online Catalogue
>
CLIPPER PARTS
>
Aesculap clipper parts
>
Aesculap GT474
