|
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
PLEASE SCROLL ALL THE WAY DOWN THIS PAGE TO ENSURE YOU SEE ALL PARTS LISTED TO DATE!
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Aesculap FAV5 "CL" GT306 - Battery unit
Ref: GT201
Aesculap FAV5 "CL" GT306 - Battery unit
Cell type: "Li"
DC voltage: 7.4v
Capacity: approx. 1.2Ah
Charge time: 50 minutes +/- 5 minutes
Part number: GT201
See diagram above - item 1
|
|
|
 | Aesculap FAV5 "CL" GT306 - Lower body casing
Ref: GT300801
Aesculap FAV5 "CL" GT306 - Lower body casing
Supplied without body screws.
Part number: GT300801
See diagram above - item 2
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £11.40 (Including VAT at 20%)
|
|
|
 | Aesculap FAV5 "CL" GT306 - Upper body casing
Ref: GT300802
Aesculap FAV5 "CL" GT306 - Upper body casing
Supplied without on/off switch,
Part number: GT300802
See diagram above - item 3
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £26.40 (Including VAT at 20%)
|
|
|
 | Aesculap FAV5 "CL" GT306 - On/off switch
Ref: GT200248
Aesculap FAV5 "CL" GT306 - On/off switch
Part number: GT300802
See diagram above - item 4
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Switch contact
Ref: GT200249
Aesculap FAV5 "CL" GT306 - Switch contact
Part number: GT200249
See diagram above - item 5
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Oil felts
Ref: GT104224
Aesculap FAV5 "CL" GT306 - Oil felts - each.
It is recommended to change both felts at the same time when necessary
Part number: GT104224
See diagram above - item 7
Price: £0.42 (Including VAT at 20%)
|
|
|
 | Aesculap FAV5 "CL" GT306 - Drive lever
Ref: GT300808
Aesculap FAV5 "CL" GT306 - Drive lever
Whilst appearing very similar to both the FAV II GT104 and FAV5 GT105 drive levers - please note only part
number GT300808 should be used for this model.
It is important to change the drive lever if there is signs of wear at any time as this can affect the clipper's
cutting performance.
Drive levers should be inspected for any signs of wear whenever clipper performance is thought to be not at
its peak, and should be normally inspected annually for signs of mechanical wear.
Apply grease GT604 liberally to the worm gear when fitting a new drive lever.
Part number: GT105808
See diagram above - item 8
|
|
|
 | Aesculap FAV5 "CL" GT306 - Locking washer
Ref: TA003820
Aesculap FAV5 "CL" GT306 - Locking washer or circlip,
Part number: TA003820
See diagram above - item 9
Price: £0.84 (Including VAT at 20%)
|
|
|
 | Aesculap FAV5 "CL" GT306 - Felt washer
Ref: GT104225
Aesculap FAV5 "CL" GT306 - Felt washer
Part number: GT104225
See diagram above - item 10
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
|
|
|
 | Aesculap FAV5 "CL" GT306 - PCB
Ref: GT200850
Aesculap FAV5 "CL" GT306 - PCB
Part number: GT200850
See diagram above - item 11
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Motor unit
Ref: GT300890
Aesculap FAV5 "CL" GT306 - Motor unit
Part number: GT300890
See diagram above - item 12
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Washer
Ref: TA004637
Aesculap FAV5 "CL" GT306 - Washer 5 x 0.5
Part number: TA004637
See diagram above - item 13
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Screw
Ref: TA013517
Aesculap FAV5 "CL" GT306 - Screw M3 x 6
Part number: TA013517
See diagram above - item 14
|
|
|
 | Aesculap FAV5 "CL" GT306 - Screw
Ref: TA013499
Aesculap FAV5 "CL" GT306 - Screw for body casing M3 x 16
Part number: GT300890
See diagram above - item 15
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Blade hinge assembly
Ref: GT105415
Aesculap FAV5 GT105 - Blade hinge assembly complete with two fixing screws and with blade release lever fitted.
We suggest you do not separate the blade release lever from the hinge assembly as it has been seated on the
two hair springs crucial for its effectiveness in releasing the blade, and is ready for instant instillation.
Part number: GT105415
See diagram above - item 16
Price: £16.21 (Including VAT at 20%)
|
|
|
 | Aesculap FAV5 "CL" GT306 - Motor O-ring
Ref: TA013522
Aesculap FAV5 "CL" GT306 - Motor O-ring 30 x 2.65
Part number: TA013522
See diagram above - item 17
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Motor O-ring
Ref: TA013521
Aesculap FAV5 "CL" GT306 - Motor O-ring 32 x 3.6
Part number: TA013521
See diagram above - item 18
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
 | Aesculap FAV5 "CL" GT306 - Charger cable with UK 3 pin plug
Ref: TA012169
Aesculap FAV5 "CL" GT306 - Charger cable with UK 3 pin plug.
Average power lead length: 1.8m
Part number: TA012169
See diagram above - item 18b
Charger cables are available with
UK 3 pin plug,
Euro flat 2 pin plug .
USA 110/125v - 2 pin connector plug.
Japan/Mexico 110/125v - 2 pin connector plug.
Average power lead length: 1.8m
|
|
|
 | Aesculap FAV5 "CL" GT306 - Charger cable with EC 2 pin connector
Ref: TA012170
Aesculap FAV5 "CL" GT306 - Charger cable with UK 3 pin plug.
Average power lead length: 1.8m
Part number: TA012170
See diagram above - item 18b
Charger cables are available with
UK 3 pin plug,
Euro flat 2 pin plug .
USA 110/125v - 2 pin connector plug.
Japan/Mexico 110/125v - 2 pin connector plug.
Average power lead length: 1.8m
|
|
|
 | Aesculap FAV5 "CL" GT306 - Charger cable for USA power supply
Ref: TA012168
Aesculap FAV5 "CL" GT306 - Charger cable with US 2 pin connector.for 110/125v system
Average power lead length: 1.8m
Part number: TA012168
See diagram above - item 18c
Charger cables are available with
UK 3 pin plug,
Euro flat 2 pin plug .
USA 110/125v - 2 pin connector plug.
Japan/Mexico 110/125v - 2 pin connector plug.
Average power lead length: 1.8m
|
|
|
 | Aesculap FAV5 "CL" GT306 - Charger base unit
Ref: GT203800
Aesculap FAV5 "CL" GT306 - Charger base unit
Please note: The base unit is supplied without cable and plug
Part number: GT203800
See diagram above - item 22
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
