| |
|
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | Aesculap FAV5 GT105 - Upper body casing
Product code: GT1058022
Aesculap FAV5 GT105 - Upper body housing
supplied without body screws or air fliter.
Part number: GT1105802
Item 3 on the above parts diagram.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
TRADE DISCOUNTS!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Please contact us on 0044 (0)1424 882900
between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
Price: £25.56 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Lower body casing
Product code: GT105801
Aesculap FAV5 GT105 - Lower body casing
Supplied as shown and without body screws.
Part number: GT105801
Item 2 on the above parts diagram.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Price: £10.76 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Blade hinge assembly
Product code: GT105415
Aesculap FAV5 GT105 - Blade hinge assembly complete with two fixing screws and with blade release lever fitted.
We suggest you do not separate the blade release lever from the hinge assembly as it has been seated on the two hair springs crucial for its effectiveness in releasing the blade, and is ready for instant instillation.
Part number: GT105415
Item 31 on the above parts diagram.
Price: £16.21 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Drive lever
Product code: GT105808
AESCULAP FAV5 GT105 - Drive lever
Whilst appearing identical to the FAV II GT104 drive lever - please note there is an importance difference in the lever tip. Do not attempt to fit the incorrect part.
It is important to change the drive lever if there is signs of wear as this can affect the clipper's cutting performance.
Drive levers should be inspected annually for signs of mechanical wear.
Apply grease GT604 liberally to the worm gear when fitting a new drive lever.
Part number: GT105808
Item 09 on the above diagram
Price: £10.56 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Printed circuit board
Product code: GT104850
Aesculap FAV5 GT105 - Printed Circuit Board (PCB)
Part number: GT104850
Item 01 on the above diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries out side of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
Price: £69.78 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Rocker switch
Product code: TA004691
AESCULAP FAV5 GT 105 - Rocker on/off switch
(Supplied without rubber protector cover.)
Part number: GT004691
Item 32 on the above diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £5.04 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Rubber switch protector
Product code: GT104249
AESCULAP FAV5 GT105 - Rubber switch protector.
Part number: GT104249.
Item 35 on the above diagram.
Price: £2.16 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Air filter
Product code: GT104803
AESCULAP FAV5 GT105 - Air filter
Will also fit Aesculap Fav II and Elektra models GH2012 and GH204
This air filter is not suitable for the Aesculap Ehmann model GH214
Item 04 on the above diagram
Price: £6.65 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Carbon brush without spring
Product code: GT104614
Aesculap FAV5 GT105 - Carbon brush without spring.
Supplied as one single brush.
Carbon brushes require to be replaced as a pair and not individually. As a guidance replace brushes when worn to below 0.2-inches. Do not attempt to run the clipper without brushes, as this will cause damage.
Part number: GT104614
Item 2 & 22 on the above diagram
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £3.70 (Including: VAT at 20%)
|
|
|
 | Aesculap FAV5 GT105 - Oil felts
Product code: GT104224
Aesculap FAV5 GT105 - Oil felts - each
It is recommended to change both felts at the same time when necessary.
Part number: GT104224
Item 16 on the above diagram
Price: £0.42 (Including: VAT at 20%)
|
|
|
 | Aesculap Grease
Product code: GT605
Aesculap Grease
Specially formulated grease designed for use on the Aesculap Favourita II and FAV5 drive lever mechinisum to give peak performance at all times.
20m tube
Price: £8.27 (Including: VAT at 20%)
|
|
