IMPORTANT CUSTOMER INFORMATION.
It has come to our and Aesculap' s attention that some customers using Aesculap blades are experience difficulties in the re-sharpening quality of these blades having once been used as new from the Aesculap factory.
Of course there should not be any problems if the sharpening is done correctly and by suitably skilled blade sharpeners familiar with the Aesculap various type blades, who are using the correct lapping machinery for the sharpening, and following Aesculap recommendations for lapping.
Aesculap blades have a history of remaining sharp for long periods when correctly sharpened. Indeed many cases suggest even with frequent daily use these blades can remain sharp for periods sometimes exceeding a year.
One cannot stress enough that the key factor to their lasting performance is dependant to a large extent on how they are sharpened and where necessary reset!
The sharpening problems appears to centre around several factors
· Inexperience in correct methods of sharpening this type of blade
· Use of the wrong type machinery
· Lack of understanding how Aesculap blades should be both sharpened and if necessary tensioned correctly before returning to the customer.
· An inability to tension correctly - in respect of Favorita II blades.
Whilst Aesculap are attempting to re-dress the situation urgently - this will regrettably take time.
In the mean time we would urge all customers who are experiencing problems either with their clippers or blades to send them to us and in the worst cases we may return them to the Aesculap factory for refurbishing. Be assured however both we and Aesculap are anxious that the performance quality of these outstanding machines is safeguarded at all times.
Hopefully we will be able to ensure you enjoy the high performance for which these machines and their blades are renowned.
Blades and/or clippers should be sent to:
PEASRIDGE S S LIMITED
Stonelink
Stubb Lane
BREDE
Nr Rye
East Sussex
TN31 6BL
Insurance covering loss whilst in transit is worth considering in view of the high value of both the clipper and blades.
|
|
|
 | BLADES - AESCULAP - 501/502 - Standard
Product code: CB0001
Upper plate: GT501 - 15 teeth
Lower plate: GT502 - 31 teeth
Depth of cut: 3mm
Width of cut: 74mm average
Standard blade GT501/502 to fit the following: -
Aesculap Econom SE models GT270-GT296
Aesculap Econom Plus clippers - models GT367-GT474G
Aesculap Econom Equipe.
This is the blade normally fitted and supplied with Aesculap clippers sold in the UK, and is currently supplied and sold with the present GT474G model.
Perfect blade for standard horse clipping and general cattle bodywork pre shows.
Clips to 2mm.
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve
and maintain peak cutting performance.
CUSTOMER INFORMATION
This blades will also fit Heiniger and Stewart Oster
clippers.
The following Liscop machines can be fitted with this blade.
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP AKKU-1600
IF YOU FEEL YOU NEED TO DISCUSS YOUR CLIPPING REQUIREMENTS OR WANT FURTHER ADVICE REGARDING CLIPPERS OR BLADES
please contact us - without obligation on Tel: 01424 882900
Telephone lines are open for product enquires from 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
Price: £38.69 (Including: VAT at 17.5%)
|
|
|
 | BLADES - AESCULAP - 505/502 - Specialist standard horse
Product code: CB0160
Upper plate: GT501 - 23 teeth
Lower plate: GT511 - 31 teeth
Depth of cut: 3mm
Width of cut: 74mm average
Specialist standard horse blade GT505/502 to fit the following: -
Aesculap Econom SE models GT270-GT296
Aesculap Econom Plus clippers - models GT367-GT474G
Aesculap Econom Equipe.
A specialist standard horse blade clipping to 3mm for high quality full body clipping performance and general pre show bodywork. Give a really smooth clip when correctly used. Ideal blade for those
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve
and maintain peak cutting performance.
CUSTOMER INFORMATION
This blades will also fit Heiniger and Stewart Oster
clippers.
The following Liscop machines can be fitted with this blade.
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP AKKU-1600
Price: £38.69 (Including: VAT at 17.5%)
|
|
|
 | BLADES - AESCULAP - 501/511 - Fine
Product code: CB0002
Upper plate: GT501 - 15 teeth
Lower plate: GT511 - 31 teeth
Depth of cut: 1mm
Width of cut: 74mm average
Fine blade GT501/511 to fit the following: -
Aesculap Econom SE models GT270-GT296
Aesculap Econom Plus clippers - models GT367-GT474G
Aesculap Econom Equipe.
Fine blade clipping to 1mm used widely for black and white dairy cow clipping and general bodywork pre shows.
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve
and maintain peak cutting performance.
CUSTOMER INFORMATION
This blades will also fit Heiniger and Stewart Oster
clippers.
The following Liscop machines can be fitted with this blade.
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP AKKU-1600
Price: £44.72 (Including: VAT at 17.5%)
|
|
|
 | BLADES - AESCULAP - 508/505 - Ultra Fine
Product code: CB0003
Upper plate: GT505 - 23 teeth
Lower plate: GT508 - 51 teeth
Depth of cut: 1.10mm
Width of cut: 74mm average
Ultra Fine blade 508/505 to fit the following: -
Aesculap Econom SE models GT270-GT296
Aesculap Econom Plus clippers - models GT367-GT474G
Aesculap Econom Equipe.
The ultra fine blade clips to 0.1mm and is suitable for dairy cattle, and any work involving close clipping such as surgical.
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve
and maintain peak cutting performance.
CUSTOMER INFORMATION
This blades will also fit Heiniger and Stewart Oster
clippers.
The following Liscop machines can be fitted with this blade.
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP AKKU-1600
Price: £44.72 (Including: VAT at 17.5%)
|
|
|
 | BLADES - AESCULAP - 505/510 - Plucking
Product code: CB0004
Upper plate: GT505 - 23 teeth
Lower plate: GT510 - 24 teeth
Depth of cut: 5m
Width of cut: 74mm average
Medium blade 506/505 to fit the following: -
Aesculap Econom SE models GT270-GT296
Aesculap Econom Plus clippers - models GT367-GT474G
Aesculap Econom Equipe.
Referred to as the "plucking" blade it clips to a finished 5mm length, and is suitable for certain show cattle and often used for legwork on horses. Several professional dog exhibitors and groomers use this blade for situations involving matted coats and speak very highly of its ability.
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve
and maintain peak cutting performance.
CUSTOMER INFORMATION
This blades will also fit Heiniger and Stewart Oster
clippers.
The following Liscop machines can be fitted with this blade.
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP AKKU-1600
Price: £51.55 (Including: VAT at 17.5%)
|
|
|
 | BLADES - AESCULAP - 503/504 - Extra Coarse
Product code: CB0005
Upper plate: GT503 - 17 teeth
Lower plate: GT504 - 18 teeth
Depth of cut: 3m
Width of cut: 74mm average
Extra Coarse 503/504 to fit the following: -
Aesculap Econom SE models GT270-GT296
Aesculap Econom Plus clippers - models GT367-GT474G
Aesculap Econom Equipe
This blade clips to 3mm and is suitable for most beef cattle, and especially commercial cattle requiring to be clipped before housing. It is a good blade for coping with hair matted with manure or other types of dirt.
This blade should be considered for use also on horses especially thick coated cobs or the more dense coated native breeds. Can be used effectively on the odd individual sheep, but is not recommended for and degree of shearing use on wool fibres on sheep or similar coated animals.
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve
and maintain peak cutting performance.
CUSTOMER INFORMATION
This blades will also fit Heiniger and Stewart Oster
clippers.
The following Liscop machines can be fitted with this blade.
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP AKKU-1600
Price: £39.84 (Including: VAT at 17.5%)
|
|
|
 | BLADES - AESCULAP - 506/505 - Medium
Product code: CB0006
Upper plate: GT505 - 23 teeth
Lower plate: GT508 - 24 teeth
Depth of cut: 3m
Width of cut: 74mm average
Medium blade 506/505 to fit the following: -.
Aesculap Econom SE models GT270-GT296
Aesculap Econom Plus clippers - models GT367-GT474G
Aesculap Econom Equipe
The medium blade clips to 3mm and is suitable for certain dairy breeds, some show cattle and horses. For horse owners a blade worth considering as a possible alternative to the standard blade as it has more teeth on the cutter blade, but fewer on the comb blade.
Aesculap blades are made to a very high standard, and as such require to be sharpened by professional blade sharpeners familiar with the make and quality of this blade to achieve
and maintain peak cutting performance.
CUSTOMER INFORMATION
This blades will also fit Heiniger and Stewart Oster
clippers.
The following Liscop machines can be fitted with this blade.
LISCOP 1300 TD Power Clip.
LISCOP EQUI-CLIP 1400-3-TD
LISCOP EQUI-CLIP AKKU-1600
Price: £38.69 (Including: VAT at 17.5%)
|
|
