| |
The listing of further individual parts items for this web page is under construction - however it may take several months to complete the full parts list. Even then it may be constantly changed as the manufacturer updates.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900/882211
Telephone lines are open for parts and product enquires from (UK time: ) 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays.
Product items such as batteries and chargers for clipping machines are listed under "CLIPPER ACCESSORIES" in the "Departments" list on the LHS of your screen
..........................................................................................................................................................................................................................................................................................................
TRADE DISCOUNTS on CLIPPER & SHEARING machine parts!
Trade discounted prices are available on all parts to bona fide trade repair businesses.
Contact us on 0044 (0)1424 882900 between 10am and 5pm Mondays to Fridays for prices.
Please have all appropriate details relating to make and model of machine, as well as applicable part or diagram identification numbers to hand.
...........................................................................................................................................................................................................................................................................................................
SHIPPING
We ship worldwide.
The safe arrival of your order is important to us! We seek to therefore ship using a reliable carrier with adequate insurance cover against loss.
Most items will require a signature on arrival at their destination.
In the case of International shipping, and outside the UK mainland, we only charge the actual cost as paid by us which is based on the gross weight of your order. Shipping charges are advised once we have your order in full and can calculate the gross weight. Should the shipping charge be unacceptable, we will happily refund the full payment made on receipt of being informed
We make every effort to ship clipper and shearing machine parts the same day as full payment is received.
....................................................................................................................................................................................................................................................................................................................
WHEN ORDERING CLIPPER & SHEARING MACHINE PARTS
Please ensure you always quote the MAKE & MODEL of any machine for which you are seeking parts and if possible the part number from the diagram above if shown. It is impossible to avoid errors if customers do not order with the correct part numbers.
In situation where our diagrams do not provide either a part number or identification, please supply clear and in-focus jpeg images. Images should show the full upper body aspect of the machine, and underside image of the machine head with or without blades fitted. Images of identification plates/labels are useful but not essential.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - SHIPPING CHARGES WHEN ORDERING PARTS:
Please be mindful when placing an order for low value parts we have a minimum shipping charge of £6.65 per shipment irrespective of the product value.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IMPORTANT - ELECTRICAL INFORMATION - ALL CUSTOMERS PLEASE NOTE :
When dealing with electrical products there is a physical danger involved, especially if you are not electrically qualified.
In the UK it is mandatory for an electrical test to be undertaken by a professional engineer before the machine is returned to the customer for future use.
All electrical parts and images describe and or shown on this web page are offered for sale for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated. Certain internal parts are not suitable for non 220/240v units.
Certain parts are obtainable for 110/115v machines, but customers need to state at the time of ordering if their machine is 110/115v rated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician if in any doubt, before placing an order. Parts once supplied are normally not returnable! In those exceptional cases where parts are return, the cost of shipping back to Peasridge is the sole responsibility of the purchaser.
Please remember you may invalidate any manufacturer's warranty terms and conditions by either making internal inspection or repairs yourself. In the event of a repair or service to a clipper or trimmer within the warranty period you should return it to the original supplier or to a stated authorised service centre to protect your warranty cover period. However many simple maintenance aspects which do not involve the opening of the machine body casing can be easily carried out by owners. Often detailed instructions regarding these operations can be found in your clipper/shearing machine manual relating to such parts.
Peasridge S.S Limited stress the importance of adhering strictly to all the manufacturer's instructions and their recommendations at all time without exception, and as such accepts no liability for any physical harm to persons, any animals that may be present, (whether theirs or not, ) or damage to machine parts existing or new, or to machine/s and any accessories involved.
ONLY use genuine manufacturer's parts - these normally carry a period of warranty against defect.
................................................................................................................................................................................................................................................................................................................
Please be advised!
We DO NOT under any circumstances give advice on how to undertake technical work involving machine parts.
..................................................................................................................................................................................................................................................................................................................
|
|
|
 | ANDIS AGC two speed clipper - Drive cap - BLACK
Product code: 65267
Drive cap.- black
Part number: 65267
See clipper diagram above for parts location. Item 1
Price: £2.64 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Drive cap - BLUE
Product code: 22449
Drive cap - complete with foam hair protector
Part number: 22449
See clipper diagram above for parts location. Item 1
Price: £2.64 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Upper housing unit - BLACK
Product code: 65344
Upper housing unit
Supplied complete with new style switch.
Part number: 65344
See clipper diagram above for parts location. Item 2
IMPORTANT!
The part number 65344 now replaces part number 65237 - the original upper casing. This enables the fitting of the new replacement PCB #63459 that replaces the original PCB and the previous replacement part number 63134.
Please remember when you change the old white switch to the new orange
switch you MUST also replace the upper housing with a new upper housing
#65344 that is designed to work with the orange switches.
The old original switch was "White", the new switch is "Orange".
New Upper Housings should be used with the new orange switches, and are as follows:
AGC single speed - new upper housing is # 65343
AGC 2 speed - new upper housing is # 65344
AGC Super 2 - new upper housing is # 23879
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £5.94 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Upper housing unit - BLUE
Product code: 65886
ANDIS AGC two speed clipper - Upper housing unit - BLUE
Upper housing unit for the ANDIS AGC 2 speed "Ultra Edge" clipper "Special Edition"
The body casing is in blue.
Supplied complete with switch.
Part number: 65886
See clipper diagram above for parts location. Item 2
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £6.86 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Motor frame clip
Product code: 27198
ANDIS AGC two speed clipper - Motor frame clip
Part number: 27198
See clipper diagram above for parts location. Item 3
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.35 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Screw for PCB
Product code: 65828
ANDIS AGC two speed clipper - Screw for PCB (one only)
Part number: 65828
See clipper diagram above for parts location. Item 4
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC Super two-speed clipper
Price: £1.37 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - PCB unit
Product code: 63459
PCB unit with orange switch
Part number: 63459
See clipper diagram above for parts location. Item 5
IMPORTANT CUSTOMER INFORMATION!
Part number 63459 now replaces the original PCB part and replacement part number 63143.
Please remember when you change the old white switch to the new orange
switch you MUST also replace the upper housing with a new upper housing
#65343 that is designed to work with the orange switches.
The old switch was "White", the new switch is "Orange".
New Upper Housings should be used with the new orange switches, and are as follows:
AGC single speed - new upper housing is # 65343
AGC 2 speed - new upper housing is # 65344
AGC Super 2 - new upper housing is # 23879
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £32.04 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Field assembly
Product code: 27352
ANDIS AGC two speed clipper - Field assembly
Part number: 27352
See clipper diagram above for parts location. Item 6
Price: £18.00 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Brush retaining clip
Product code: 65805
ANDIS AGC two speed clipper - Brush retaining clip
Part number: 65808
See clipper diagram above for parts location. Item 7
This part may also be fitted to the following Andis models:
Andis AGC single speed clipper
Andis AGC Super two-speed clipper
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.79 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Insulator
Product code: 65829
High voltage insulator
Part number: 65829
See clipper diagram above for parts location. Item 8
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.95 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Bale hanger
Product code: 22267
ANDIS AGC two speed clipper - Bale hanger
For units sold after 7th March 2003
Part number: 22267
See clipper diagram above for parts location. Item 9
Price: £0.42 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Rear motor frame
Product code: 64945
ANDIS AGC two speed clipper - Rear motor frame
Part number: 64945
See clipper diagram above for parts location. Item 30
Price: £1.37 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Lower housing unit - BLACK
Product code: 65224
Lower housing unit
This lower housing part can be used on either the AGC single or two speed machines - it cannot however be used for the AGCS2 - Super 2-speed machine.
Part number: 65224
Please note: Body casing screws are not supplied. If required these need to be ordered separately.
See clipper diagram above for parts location. Item 11
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £4.36 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Lower housing unit - BLUE
Product code: 65334
ANDIS AGC two speed clipper - Lower housing unit - BLUE
Lower housing unit for the ANDIS AGC 2 speed "Ultra Edge" clipper "Special Edition"
The body casing is in blue
Part number: 65334
See clipper diagram above for parts location. Item 11
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £6.86 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Hinge assembly
Product code: S63897
Blade hinge assembly.
It is important when fitting the hinge assembly that you ensure the two hair spring sprigs are correctly slotted into the two holes provided in the blade release lever (see red arrows) before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.
Part number: S63897
See clipper diagram above for parts location. Item 13
Price: £5.28 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Blade lock
Product code: 64537
Blade release lock.
It is important when fitting the blade release lever that you ensure the two hair spring sprigs of the holding plate (blade hinge assembly) are correctly slotted into the two holes provided (see red arrows) before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.
Part number: 64537
See clipper diagram above for parts location. Item 14
Price: £0.66 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Lock keeper
Product code: 64535
Lock keeper.
This is inserted under blade release latch (item: 14) and held in place with the screws used to fix the hinge assembly (item: 15)
Part number: 64535
See clipper diagram above for parts location. Item 15
Price: £0.53 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Blade hinge assembly screw
Product code: 27861
Blade hinge assembly screw. (Please note - One only)
Screw used for fitting the hinge assembly (When doing so that you ensure the two hair spring sprigs are correctly slotted into the two holes provided in the blade release lever before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.)
Part number: 27861
See clipper diagram above for parts location. Item 16
Price: £0.66 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Carbon brush and shunt
Product code: 27847
Carbon brush complete with shunt and terminal. (one only)
Please note: The spring is a seperate item. (See item number 31 on the above diagram.)
Part number: 27847
See clipper diagram above for parts location. Item 17
Price: £2.38 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Blade bracket
Product code: 64003
Andis A5 blade bracket - part of the blade assambly
Part number: 64003
See clipper diagram above for parts location. Item 18
Price: £1.60 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Blade screws
Product code: 64139
Andis A5 lower blade screws, supplied as a pair (2) and used to secure the cutter and comb blade assembly
Part number: 64139
See clipper diagram above for parts location. Item 19
Price: £1.58 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Blade guide
Product code: 64027
Andis A5 blade guide.
It is important when fitting the white nylon blade guide that you unsure it fit completely over the tension spring, otherwise it may cause the cutter blade to not cut correctly.
Part number: 64027
See clipper diagram above for parts location. Item 20
Price: £0.53 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Tension spring
Product code: 64013
Blade tension spring - supplied without nylon sleeve or screws.
Used to secure the cutter to the comb or bottom blade.
Part number: 64013
See clipper diagram above for parts location. Item 21
Price: £2.40 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Armature assembly
Product code: 21977
Armature assembly
The armature assembly is supplied complete with cam.
Part number: 21977
See clipper diagram above for parts location. Item 22
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £44.22 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Cam assembly
Product code: 27854
Cam assembly.
This fits the armature - part number 21977
Part number: 27854
See clipper diagram above for parts location. Item 23
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £12.54 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Large bearing cup
Product code: 21068
ANDIS AGC two speed clipper - Large bearing cup
Part number: 21068
See clipper diagram above for parts location. Item 24
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC super two-speed clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.54 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Front motor frame
Product code: 65013
Front motor frame
Part number: 65013
See clipper diagram above for parts location. Item 25
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £2.64 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Small bearing cup
Product code: 21067
ANDIS AGC two speed clipper - Small bearing cup
Part number: 21067
See clipper diagram above for parts location. Item 30
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC Super two-speed clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.49 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Blade drive assembly
Product code: S20651
Replacement blade drive assembly
Routine maintenance task requirement easily carried out.
If not carried out at regular intervals, clipper performance may be impaired.
Supplied with detailed fitting instructions
Part number: S20651
(NOTE! This part number now replaces part number 22319)
See clipper diagram above for parts location. Item 26
Price: £2.90 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Blade drive screw
Product code: 15766
ANDIS AGC two speed clipper - Blade drive screw (one only)
Part number: 15766
See clipper diagram above for parts location. Item 27
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC Super two-speed clipper
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
Price: £0.66 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Brush spring
Product code: 65806
ANDIS AGC two speed clipper - Brush spring - single spring each.
Please note: The Carbon brush with shunt is not supplied with the brush spring.
This may be purchased as a separate item. (See item number 14 on the above diagram.)
The manufacturers recommend both carbon brushes are changed at the same time.
Brushes should be checked at regular intervals to avoid wear on the armature.
Part number: 65806
See clipper diagram above for parts location. Item 31
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.31 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Oil seal
Product code: 64991
Oil seal
Part number: 64991
Item 32 on the diagram above
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.79 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - Drive cap foam insert
Product code: 17091
ANDIS AGC two speed clipper - Adhesive drive cap foam insert
Clean area well of any hairs before placing in position.
Part number: 17091
Not shown on clipper diagram above part of item 1 - drive cap
This part may also be fitted to the following Andis models:
Andis AGC single speed clipper
Andis AGC Super two-speed clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.53 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - RFI 230v capacitor assembly
Product code: 22686
RFI 230v capacitor assembly
Part number: 22686
Item 34 on clipper diagram above.
Price: £1.85 (Including: VAT at 20%)
|
|
|
 | ANDIS AGC two speed clipper - UK cord assembly
Product code: 62661
UK cord assembly complete with 3 pin moulded UK plug - suitable for UK 230/240v machines only!.
This part number replaces all-previous part numbers for UK cord assembly units.
Part number 62661
Not shown on the diagram above
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £12.28 (Including: VAT at 20%)
|
|
