| |
The listing of further individual parts items for this web page are under construction - however it may take several months to complete the full parts list.
If you feel you need further advice regarding parts, or require various parts not currently listed below for this model please either telephone or e-mail us your requirements.
E-mail:
shop@peasridge.co.uk
or
Telephone:
UK Mainland: 01424 882900/882211
Overseas: 0044 1424 882900
Telephone lines are open for product enquires from 1030 to 1230 hrs and from 1430 until 1630 hrs Monday to Friday.
Please note:
Our offices are shut on Saturday, Sunday and all Bank Holidays
IMPORTANT ELECTRICAL INFORMATION:
All electrical parts offered for sale on this web site are for use with the 220/240volt electrical supply system as operated in the UK and certain parts of Europe unless otherwise stated.
Customers from the USA and countries outside of the UK and European Countries should check their electrical supply rating and seek professional advice from a qualified electrician, before placing an order.
|
|
|
 | ANDIS AGC super 2- speed clipper - Lower housing unit
Product code: 65283
Lower housing unit - burgundy
Please note: Body casing screws and bale arm are not supplied. If required these need to be ordered separately.
Part number: 65283
See clipper diagram above for parts location. Item 11
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £4.52 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2- speed clipper - Upper housing unit
Product code: 23879
Upper housing unit - burgundy
Supplied complete with switch actuator, switch button and switch button lock.
Part number: 23879
See clipper diagram above for parts location. Item 2
IMPORTANT CUSTOMER INFORMATION!
The part number 23879 now replaces part number 23871 - the original upper casing. This enables the fitting of the new replacement PCB #63459 which replaces the original PCB with white switch which is no longer available.
Please remember when you change the old PCB white switch to the PCB with new orange
switch you MUST also replace the upper housing with a new upper housing
#23879 that is designed to work with the PCB with orange switches.
The old PCB switch was "White", the new PCB switch is "Orange".
New Upper Housings should be used with the new PCB with orange switches, and are as follows on the following Andis models:
AGC single speed - new upper housing is # 65343
AGC 2 speed - new upper housing is # 65344
AGC Super 2 - new upper housing is # 23879
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £8.00 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2- speed clipper - Drive cap
Product code: 65266
Drive cap - burgundy
Part number: 65266
See clipper diagram above for parts location. Item 1
Price: £2.59 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2 speed clipper - Drive cap foam insert
Product code: 17091
ANDIS AGC super 2 speed clipper - Adhesive drive cap foam insert
Clean area well of any hairs before placing in position.
Part number: 17091
Not shown on clipper diagram above part of item 1 - drive cap
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC two-speed clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.52 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Cam assembly
Product code: 27854
Cam assembly.
This fits the armature - part number 21977
Part number: 27854
See clipper diagram above for parts location. Item 23
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £12.28 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - PCB unit
Product code: 63459
PCB unit with orange switch
Part number: 63459
See clipper diagram above for parts location. Item 5
IMPORTANT!
Part number 63459 now replaces the original PCB part and replacement part number 63143.
Please remember when you change the old white switch to the new orange
switch you MUST also replace the upper housing with a new upper housing
#65343 that is designed to work with the orange switches.
The old switch was "White", the new switch is "Orange".
New Upper Housings should be used with the new orange switches, and are as follows:
AGC single speed - new upper housing is # 65343
AGC 2 speed - new upper housing is # 65344
AGC Super 2 - new upper housing is # 23879
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £31.37 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Front motor frame
Product code: 65013
Front motor frame
Part number: 65013
See clipper diagram above for parts location. Item 25
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £2.59 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Carbon brush and shunt.
Product code: 27847
Carbon brush complete with shunt and terminal. (one only)
Please note: The spring is a seperate item. (See item number 31 on the above diagram.)
Part number: 27847
See clipper diagram above for parts location. Item 17
Carbon brushes should be checked periodically to access wear and avoid any motor damage.
Information on Carbon brush "life hours" can usually be found in the clipper manual.
PLEASE NOTE!
Manufacturers recommend that carbon brushes are renewed as a pair and not individually as this may cause damage to the motor system of your clipper.
This carbon brush shunt and terminal can be fitted to the following Andis models:
Andis AGC two-speed clipper
Andis AGC Super two-speed clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £2.33 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2 speed clipper - Brush retaining clip
Product code: 65805
ANDIS AGC super 2 speed clipper - Brush retaining clip
Part number: 65808
See clipper diagram above for parts location. Item 7
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC two-speed clipper
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.78 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2 speed clipper - Large bearing cup
Product code: 21068
ANDIS AGC super 2 speed clipper - Large bearing cup
Part number: 21068
See clipper diagram above for parts location. Item 24
This part may also be fitted to the following Andis models:
Andis AGC single speed clipper
Andis AGC two-speed clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.53 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2 speed clipper - Small bearing cup
Product code: 21067
ANDIS AGC super 2 speed clipper - Small bearing cup
Part number: 21067
See clipper diagram above for parts location. Item 30
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC two-speed clipper
It is however NOT suitable for:
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.48 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - RFI 230v capacitor assembly
Product code: 22686
RFI 230v capacitor assembly
Part number: 22686
Item 34 on clipper diagram above.
Price: £1.81 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Oil seal
Product code: 64991
Oil seal.
Part number: 64991
Item 32 on the diagram above
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.78 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2 speed clipper - Screw (one only)
Product code: 65828
ANDIS AGC super 2 speed clipper - Screw (one only)
Part number: 65828
See clipper diagram above for parts location. Item 4
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC two-speed clipper
Price: £1.34 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - High voltage insulator
Product code: 65829
High voltage insulator
Part number: 65829
See clipper diagram above for parts location. Item 8
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £0.93 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - UK cord assembly
Product code: 62661
UK cord assembly complete with 3 pin moulded UK plug - suitable for UK 230/240v machines only!.
This part number replaces all-previous part numbers for UK cord assembly units.
Part number 62661
Not shown on the diagram above
IMPORTANT - Please Note!
Persons considering making repairs to clippers themselves should be mindful such repairs may invalidate the warranty especially where it specifies repairs are to be carried out by an authorised service establishment or qualified engineer. Please refer to your clipper manual.
In addition repairs of an electrical nature or situations involving the main body casing being opened, legally require a "mandatory" electrical test to be undertaken at an approved repair centre before the machine is used again.
Price: £12.02 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Lock keeper
Product code: 64535
Lock keeper.
This is inserted under blade release latch (item: 14) and held in place with the screws used to fix the hinge assembly (item: 15)
Part number: 64535
See clipper diagram above for parts location. Item 15
Price: £0.52 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Replacement blade drive assembly
Product code: S20651
Replacement blade drive assembly
Routine maintenance requirement which is easily carried out.
If not carried out at regular intervals, clipper performance may be impaired.
Supplied with detailed fitting instructions.
Part number: S20651
(NOTE! This part number now replaces part number 22319)
See clipper diagram above for parts location. Item 26
Price: £2.84 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2 speed clipper - Blade drive screw
Product code: 15766
ANDIS AGC super 2 speed clipper - Blade drive screw (one only)
Part number: 15766
See clipper diagram above for parts location. Item 27
This part may also be fitted to the following Andis models:
Andis AGC single-speed clipper
Andis AGC two-speed clipper
Andis AGR+ cordless clipper,
Andis AGRC Power Groom clipper
Price: £0.65 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Hinge assembly
Product code: S63897
Blade hinge assembly.
It is important when fitting the hinge assembly that you ensure the two hair spring sprigs are correctly slotted into the two holes provided in the blade release lever (see red arrows) before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.
Part number: S63897
See clipper diagram above for parts location. Item 13
Price: £5.17 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Blade hinge assembly screw
Product code: 27861
Blade hinge assembly screw. (Please note - One only)
Screw used for fitting the hinge assembly (When doing so that you ensure the two hair spring sprigs are correctly slotted into the two holes provided in the blade release lever before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.)
Part number: 27861
See clipper diagram above for parts location. Item 16
Price: £0.65 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Blade latch
Product code: 64537
Blade release latch.
It is important when fitting the blade release lever that you ensure the two hair spring sprigs of the holding plate (blade hinge assembly) are correctly slotted into the two holes provided (see red arrows) before you refit and tighten the screws to the clipper head. If this is not done correctly the blade may not fit or release correctly.
Part number: 64537
See clipper diagram above for parts location. Item 14
Price: £0.65 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Blade guide
Product code: 64027
Blade guide for cutter blade.
It is important when fitting the white nylon blade guide that you unsure it fit completely over the tension spring, otherwise it may cause the cutter blade to not cut correctly.
Part number: 64027
See clipper diagram above for parts location. Item 20
Price: £0.52 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC super 2-speed clipper - Blade bracket
Product code: 64003
Andis A5 blade bracket
Part number: 64003
See clipper diagram above for parts location. Item 18
Price: £1.56 (Including: VAT at 17.5%)
|
|
|
 | ANDIS AGC single speed clipper - Blade screws
Product code: 64139
Lower blade screws, supplied as a pair (2)
These are used to secure the comb and cutter blade assembly.
Part number: 64139
See clipper diagram above for parts location. Item 19
Price: £1.55 (Including: VAT at 17.5%)
|
|
